I added one to my last one I saw.
No, they fail to vary on.

So the NWSD was successfully created even though the resource did not exist??
A hidden feature??

Paul

-----Original Message-----
From: DrFranken <midrange@xxxxxxxxxxxx>
Sent: Saturday, May 23, 2020 2:17 PM
To: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>; 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: Does IBM i host LPAR need to be IPL'd for newly created NWSD to appear

Where did you find CTL27 ?

Earlier you indicated that they didn't appear in WRKHDWRSC *CMN

Also did P080 vary on sucessfully?

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 5/23/2020 2:14 PM, Steinmetz, Paul wrote:
So the host does need an IPL.
Is there no other option?

On the host, I ran few CL.
All ran fine with no errors.


CRTNWSD NWSD(P080) RSRCNAME(CTL27) TYPE(*GUEST +
*OPSYS) PTNNBR(1) RSTDDEVRSC(*ALL) +
PWRCTL(*NO) TEXT('PENCOR08 VSCSI 80') Network server
description P080 created.

CRTNWSSTG NWSSTG(P0880A) NWSSIZE(107290) +
FROMNWSSTG(*NONE) FORMAT(*OPEN) ASP(1) +
TEXT(P0880A) OFFSET(*FORMAT) Network server storage
space P0880A created.

ADDNWSSTGL NWSSTG(P0880A) NWSD(P080) DYNAMIC(*YES) Network server
storage space link added.

Paul

-----Original Message-----
From: DrFranken <midrange@xxxxxxxxxxxx>
Sent: Saturday, May 23, 2020 2:02 PM
To: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>; 'Midrange Systems
Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: Does IBM i host LPAR need to be IPL'd for newly created
NWSD to appear

Yes you would need to IPL the hose partition with the new profile to create those *CMN resources.

Also how did you create the new NWSDs if there are no *CMN resources to assign them to??

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 5/23/2020 1:52 PM, Steinmetz, Paul wrote:
New partition fails on IPL, no load source found message.
I'm doing a D-mode manual from DVD.

I think I need to add them dynamically.

Paul

-----Original Message-----
From: DrFranken <midrange@xxxxxxxxxxxx>
Sent: Saturday, May 23, 2020 1:49 PM
To: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>; 'Midrange Systems
Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: Does IBM i host LPAR need to be IPL'd for newly created
NWSD to appear

Simplest at this point is an IPL with the new partition.

However they can be added dynamically too.

- Larry "DrFranken" Bolhuis

www.Frankeni.com
www.iDevCloud.com - Personal Development IBM i timeshare service.
www.iInTheCloud.com - Commercial IBM i Cloud Hosting.

On 5/23/2020 1:44 PM, Steinmetz, Paul wrote:
I added to them to both server and client profiles.
I'm not seeing an option to dynamically ADD the vSCSI host adapters.

Paul

-----Original Message-----
From: DrFranken <midrange@xxxxxxxxxxxx>
Sent: Saturday, May 23, 2020 1:34 PM
To: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>; 'Midrange Systems
Technical Discussion' <midrange-l@xxxxxxxxxxxxxxxxxx>
Subject: Re: Does IBM i host LPAR need to be IPL'd for newly created
NWSD to appear

Oh THOSE, those are created when the vSCSI adapters are added to the host partition. Sorry misunderstood that you were just creating more NWSSTG.

So either you need to dynamically ADD the vSCSI Host adapters to the partition or add them to the profile and IPL with the udpated profile.

- Larry "DrFranken" Bolhuis

https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.F
r
a
nkeni.com&umid=fa4e228d-20c7-4e8c-b300-0d561a9fb1d7&auth=438b0784514
c
1
757bd202125ca4db8b0abdb021e-a2226782caf16f2ae2b7c6be8d7635947b224a74
https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.iDevCloud.com&umid=fa4e228d-20c7-4e8c-b300-0d561a9fb1d7&auth=438b0784514c1757bd202125ca4db8b0abdb021e-f3c95525ecada2eaafdf9c2d3b8ae57fdb76ce43 - Personal Development IBM i timeshare service.
https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.iInTheCloud.com&umid=fa4e228d-20c7-4e8c-b300-0d561a9fb1d7&auth=438b0784514c1757bd202125ca4db8b0abdb021e-71595630fd226ce3e0c1636f50a16c848b88b57a - Commercial IBM i Cloud Hosting.

On 5/23/2020 1:22 PM, Steinmetz, Paul wrote:
Yes, they do show in option 12.
I'm looking on the host, WRKHDWRSC TYPE(*CMN) for type 290B.
All my other NWSD for my other clients do appear, just not the newly created ones.

Paul

-----Original Message-----
From: DrFranken <midrange@xxxxxxxxxxxx>
Sent: Saturday, May 23, 2020 1:13 PM
To: Midrange Systems Technical Discussion
<midrange-l@xxxxxxxxxxxxxxxxxx>
Cc: Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
Subject: Re: Does IBM i host LPAR need to be IPL'd for newly
created NWSD to appear

No.

Did you ADD the NWSSTG to the NWSD? If you WRKNWSD and option 12 it need to be in that list.

Also where are you looking? On the client correct? IF you are looking on the host they do not show up there.

- Larry "DrFranken" Bolhuis

https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.
F
r
a
nkeni.com&umid=fa4e228d-20c7-4e8c-b300-0d561a9fb1d7&auth=438b078451
4
c
1
757bd202125ca4db8b0abdb021e-a2226782caf16f2ae2b7c6be8d7635947b224a7
4
https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.iDevCloud.com&umid=fa4e228d-20c7-4e8c-b300-0d561a9fb1d7&auth=438b0784514c1757bd202125ca4db8b0abdb021e-f3c95525ecada2eaafdf9c2d3b8ae57fdb76ce43 - Personal Development IBM i timeshare service.
https://smex-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.iInTheCloud.com&umid=fa4e228d-20c7-4e8c-b300-0d561a9fb1d7&auth=438b0784514c1757bd202125ca4db8b0abdb021e-71595630fd226ce3e0c1636f50a16c848b88b57a - Commercial IBM i Cloud Hosting.

On 5/23/2020 12:51 PM, Steinmetz, Paul via MIDRANGE-L wrote:
I'm creating a new sandbox client LPAR for testing V7R4 upgrade.
On the IBM I host, I created all the NWSD, NWSSTG, etc for the new client.

They are not appearing in hardware resources.
Does the IBM I host need to be IPL'd for these to appear?

If not, why are they not appearing?


Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/


This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].