When ibm doesn't have the exact printing model in its list, I look for
something close, and verify from HP specs if supports PCL (404N supports
Print languages
HP PCL 6, HP PCL 5c, HP postscript level 3 emulation, PDF, URF, PWG Raster)
Can you show the device description you have.
This should work, and have used them
This is one
And also have more success with snmp driver
.. from RTVCFGSRC command
DEVD(PL) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) +
PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) FONT(011 *NONE) +
FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) PRTERRMSG(*INQ) +
MSGQ(*CTLD) ACTTMR(170) INACTTMR(*SEC15) LINESPEED(19200) +
WORDLEN(8) PARITY(*NONE) STOPBITS(1) TRANSFORM(*YES) +
MFRTYPMDL(*HP5SI) PPRSRC1(*LETTER) PPRSRC2(*NONE) +
ENVELOPE(*NONE) ASCII899(*NO) IMGCFG(*NONE) +
CHRID(*SYSVAL) RMTLOCNAME('10.0.1.9') +
USRDFNOPT(*IBMSHRCNN) SYSDRVPGM(*IBMSNMPDRV) +
Jim Franz
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxxxxxxxx] On Behalf Of
Dean Eshleman
Sent: Friday, April 24, 2020 5:03 PM
To: midrange-l@xxxxxxxxxxxxxxxxxx
Subject: Printer problem with HP Laserjet Pro M404n
Hi,
A few weeks ago, I asked a question about setting up a HP Laserjet Pro m402n
printer and we were able to get it working with the settings of *HP4000 and
a system driver program of *IBMPJLDRV.
We bought a new printer that is slightly different and is model HP Laserjet
Pro m404n. We tried the exact same settings with it and as soon as you send
a spool file to the output queue to print, the writer job ends with CPD337C
"The session with device &1 ended abnormally". We followed the advice on
this page
https://www.ibm.com/support/pages/configuration-settings-and-error-messages-
lan-3812-pjl-device-descriptions to try and correct it. No luck, same error
every time. We specified port 9100 on the device description. We also
tried the following things.
1. Font (I tried 11)
2. Manufacturer type and model (I tried *HP4 and *HP5SI and *RICOHAP3200)
3. System driver program (I tried *HPPJLDRV)
Ironically, on this page
https://www.ibm.com/support/pages/node/644553 where
they list information about HP printers, they don't show an M404. Not sure
what that means. Anyone have any ideas?
Dean Eshleman
Software Development Architect
Everence
1110 North Main Street
PO Box 483
Goshen, IN 46527
(800) 348-7468 ext. 3528
(574) 533-9515 ext. 3528
[Join our Talent Network]<
http://www.everence.com/careers>
Confidentiality Notice: This information is intended only for the individual
or entity named. If you are not the intended recipient, do not use or
disclose this information. If you received this e-mail in error, please
delete or otherwise destroy it and contact us at (800) 348-7468 so we can
take steps to avoid such transmission errors in the future. Thank you.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit:
https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxxxxxxxx
Before posting, please take a moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
midrange.com
