×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
1) This was a "temp solution".
I only selected the restore items from the same volume which were in sequence.
Restore streamed with no rewind, etc.
I repeated this process for each volume listed in the recovery.
2) Fiber Switch is zoned that all LPARs see all drives, no movement of SAS adapter.
We updated the zoning to include the new P9 SAS adapters.
So all P7 LPARS and P9 LPARS are seeing all four drives in the library.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Monday, December 17, 2018 8:25 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: P7 to P9 test migration/recovery using BRMS - noticing significant tape seeking, unloading, loading during the recovery
Paul:
You indicated you solved the issue you were raising? How exactly did you do
that?
Are those drives Fibre connected or SAS? Since we know you do not use VIOS,
are these drives zoned into all the partitions (assuming Fibre) or do you
move the SAS adapter between partitions?
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Monday, December 17, 2018 6:50 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: P7 to P9 test migration/recovery using BRMS - noticing
significant tape seeking, unloading, loading during the recovery
4 drives.
Device/ Job
Resource Status Allocation name
TAPMLB01 VARIED ON
TAP01 OPERATIONAL UNPROTECTED
TAP02 OPERATIONAL UNPROTECTED
TAP03 OPERATIONAL UNPROTECTED
TAP04 OPERATIONAL UNPROTECTED
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob
Berendt
Sent: Monday, December 17, 2018 7:26 AM
To: Midrange Systems Technical Discussion
Subject: Re: P7 to P9 test migration/recovery using BRMS - noticing
significant tape seeking, unloading, loading during the recovery
If you do a WRKMLBSTS on the P9 does the library show up with multiple
drives or just a single drive?
Rob Berendt
As an Amazon Associate we earn from qualifying purchases.
This thread ...
RE: P7 to P9 test migration/recovery using BRMS - noticing significant tape seeking, unloading, loading during the recovery, (continued)
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact
[javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
midrange.com
