×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
When configuring disks on a new P9 with dual EJ14, 24 SSD drives
Starting parity, Raid 5 with Hot Spare, one large parity set was created.
I wanted two parity sets, parity for performance, but the option to set parity was not available.
Is this normal behavior.
After the single set was created, additional disk options became available.
I changed parity for performance, stopped parity, then started Raid5 with Hot spare.
Now I have two parity sets, with two Hot spares.
I really only wanted 1 Hot spare, no option for this.
I do see an option to stop Hot spare on one of the units.
I would then have to add this unit back in, but this unit would not have any stripping, not recommended.
Any thoughts from the group?
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
