× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



No, it is a completely separate IP connection. Not associated with the HMC
software at all. It's hardware control.

Give it its own address.


--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Friday, December 07, 2018 8:34 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: HMC 7063-CR1 BMC - baseboard management controller

Do I use the same static IP that I used for Eth1 or does need to be a 2nd
static IP?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim
Oberholtzer
Sent: Friday, December 07, 2018 9:22 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: HMC 7063-CR1 BMC - baseboard management controller

Paul:

That's just a network connection and it's not Eth0, Eth1, ..... Those are
Linux (HMC) Ethernet ports. The HMC code does not really see the IMPI.

I highly suggest you give it a static address to avoid unpleasantness each
time the DHCP server decides to update the IP lease on that box. IE: What
the [Insert favorite strong explicative] is the IP address now!


--
Jim Oberholtzer
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L <midrange-l-bounces@xxxxxxxxxxxx> On Behalf Of Steinmetz,
Paul
Sent: Friday, December 07, 2018 8:14 AM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: HMC 7063-CR1 BMC - baseboard management controller

I read that BMC must be configured, even if not using it.

6. For HMC model 7063-CR1, you must configure the baseboard management
controller (BMC) IP address.



How should BMC be configured for network connectivity?.



Should I used the same network settings as I use for ETH1, which is a static
IP?

Or do I configure it like ETH0,



To configure the BMC connection, complete the following steps:

1. In the navigation area, click the HMC Management icon, and then select
Console Settings.
2. In the content pane, click Change BMC/IPMI network settings.
3. Select the connection mode (DHCP or Static).

If you select Static mode, complete the following addresses:

* IP address
* Subnet mask
* Gateway
1. Click OK.

You can also configure the BMC network connection by using the Petitboot
bootloader interface. For more information, see Configuring the firmware IP
address<https://www.ibm.com/support/knowledgecenter/linuxonibm/liabw/liabwen
ablenetwork.htm?view=kc>.

Paul





-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
DrFranken
Sent: Friday, December 07, 2018 8:53 AM
To: Midrange Systems Technical Discussion
Subject: Re: HMC 7063-CR1 BMC - baseboard management controller



Not required, true. Useful YES.



Look up "IPMI" under supermicro. This is what's running there.



Most x86 HMCs had IBM/Lenovo's equivalent to this however you had to add

a key to actually be able to use the system remotely with this. It also

was NOT recommended by IBM. They claimed somethihng about the BIOS could

change and so you shouldn't use or update the code etc. So most folks

didn't use it though some did and found it useful.



With IPMI you'll find a pretty full function management interface for

the HMC. You can power it up and down, update firmware, and importantly

access the boot screens remotely. You may want to look up IPMITOOL but

these use a new enough firmware that it will work in a modern browser.





- Larry "DrFranken" Bolhuis



www.Frankeni.com

www.iDevCloud.com - Personal Development IBM i timeshare service.

www.iInTheCloud.com - Commercial IBM i Cloud Hosting.



On 12/7/2018 8:32 AM, Steinmetz, Paul wrote:

HMC 7063-CR1 BMC - baseboard management controller.

The BMC is the baseboard management controller and provides the
management
and monitoring functions for the boot process and the OPAL hypervisor. It
fulfills many of the functions that the ASMI provided on the other Power
Systems servers.

So what does this all mean?

Is BMC required?

This didn't exist on the order HMCs, correct?



Thank You

_____

Paul Steinmetz

IBM i Systems Administrator



Pencor Services, Inc.

462 Delaware Ave

Palmerton Pa 18071



610-826-9117 work

610-826-9188 fax

610-349-0913 cell

610-377-6012 home



psteinmetz@xxxxxxxxxx

http://www.pencor.com/



--

This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx

To subscribe, unsubscribe, or change list options,

visit: https://lists.midrange.com/mailman/listinfo/midrange-l

or email: MIDRANGE-L-request@xxxxxxxxxxxx

Before posting, please take a moment to review the archives

at https://archive.midrange.com/midrange-l.



Please contact support@xxxxxxxxxxxx for any subscription related questions.



Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

Help support midrange.com by shopping at amazon.com with our affiliate link:
https://amazon.midrange.com


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.