+1.
We use BRMS network feature.
Backup to 3573 with 4 LTO7 HH FC,
Only 2 LPARS, 1 Production, 1 R&D.
All drives available to either LPAR via FC switch.
All volumes available to either LPAR.
Totally automated using Advanced Job Scheduler.
Auto Dup for off-site also automated.
Refresh of R&D libraries from Production nightly save also automated, as needed.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob Berendt
Sent: Friday, November 10, 2017 9:52 AM
To: Midrange Systems Technical Discussion
Subject: Re: BRMS Network Feature Was: Move a tape drive to another partition
We use BRMS Network feature. Love it!!!
When you use a VTL (or any physical library) and have the media all in one pool all the systems talk to each other and know who owns what volume. I could not imagine running without it in a multi lpar/system shop.
I don't think we replicate the BRMS stuff.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Mitchell, Dana" <dmitche@xxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 11/10/2017 09:13 AM
Subject: BRMS Network Feature Was: Move a tape drive to another
partition
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Just curios Rob, are you or anyone else here using BRMS Network Feature?
We currently have several standalone LPARs using BRMS backing up to a
DataDomain and I am planning on implementing BRMS on another LPAR that is
replicated to backup nodes using MIMIX. I'd obviously like backup and
tape information to be available on the other nodes when we do a MIMIX
switch, but the BRMS library doesn't take well to MIMIX replication. So
I am wondering about other people's experiences using BRMS Network
feature.
Dana
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob
Berendt
Sent: Friday, November 10, 2017 6:30 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: Move a tape drive to another partition
Glad you have your tape figured out. We use VIOS to virtualize that card.
We never have to move it to any of our multiple lpars of IBM i to use it.
Not only that but that one card connected to multiple drives in a
library. How? We put a SAN switch in between. Worked great! And, if
you have multiple drives in that library you can have multiple lpars
backing up at the same time.
We still have that fiber card, and the SAN. The multiple drive library
has been replaced by a Data Domain 2500 VTL. Now all the lpars can be
backed up to the numerous "drives" set up in the VTL. We actually have
the lpars doing parallel saves to four "drives" each.
And all these scenarios play well with BRMS.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Art Tostaine, Jr." <atostaine@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 11/08/2017 07:22 PM
Subject: Re: Move a tape drive to another partition
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Thanks Paul. I'll give it a try once I figure out what else is on that
adapter. I should be OK because the people who setup the system were
doing
this during testing.
Art
On Wed, Nov 8, 2017 at 7:00 PM, Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>
wrote:
Art,
I've done this often.
You don't move the tape library, but the IO adapter that the library is
attached to.
Note, ensure that the adapter driving your tape library doesn't have any
disk drives attached also, or you will crash your system.
1) Vary off library on source LPAR
2) On HMC, source LPAR, dynamic partitioning, physical adapters, move or
remove, select, in my case, 8 gb dual port fiber channel adapter, pick
the
LPAR being moved to.
3) Takes about 2 minutes, wait for adapter to report in on target.
4) Vary on libarary on target LPAR
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Art Tostaine, Jr.
Sent: Wednesday, November 08, 2017 5:58 PM
To: Midrange Systems Technical Discussion
Subject: Move a tape drive to another partition
I have a 8202-E4D that hosts 2 mimix backup partitions and a dev
partition.
I need to do a full save on the partition that doesn't have the tape
library attached to it. It's a TS3100.
Can I use the HMC to move the tape device to the other partition? I was
looking around the options and I don't see it.
I realize I can screw up a lot of stuff in there but if I can identify
the
tape drive I should be OK.
--
Art Tostaine
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at https://archive.midrange.com/midrange-l
.
Please contact support@xxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD
midrange.com
