|
And to activate the additional LIC space will take an IPL.
So plan ahead for your Production LPARs.
From the link Rob posted.
For either option (0 or 1), an IPL is needed to allocate the space.
Note
You do not need to IPL now, but you must IPL before you begin to upgrade.
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Rob Berendt
Sent: Friday, November 03, 2017 2:54 PM
To: Midrange Systems Technical Discussion
Subject: Re: Allocate LIC space for V7R1 to V7R3
No where are you told to take that option. What you are told instead
is to run this:
https://www.ibm.com/support/knowledgecenter/en/ssw_ibm_i_
73/rzahc/allocatespacelic.htm
Now, IDK why they don't say take that option. It is what we used to use.
Let's assume they are using some option on that API that the menu
doesn't support. Let's also assume that the people who work on the
menu and the people who write these instructions will not talk to each
other and fix the menu. Or maybe the menu is updated, but only if you
have PTF such and such and IBM just simply got tired of reminding
people to have that PTF on. But basically, try the API directly, as
instructed, and see if your results differ.
After all it must be drastic enough that they put all these
instructions into Knowledge Center instead of just fixing the menu.
Remember, they have to translate Knowledge Center into a bazillion different languages.
The menu was translated a coon's age ago.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Art Tostaine, Jr." <atostaine@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 11/03/2017 02:40 PM
Subject: Allocate LIC space for V7R1 to V7R3
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
I tried ordering MF59277 but it's superseded by MF99010.
If I go LICPGM, prepare for install, then Allocate addtl space, I type
in
V7R3m0 and I get CPF3DFA.
That link is dead, but I'm searching the V7R3 manuals, haven't found
what I'm missing yet. Any Ideas? Thanks
Additional Message Information
Message ID . . . . . . : CPF3DFA Severity . . . . . . . : 30
Message type . . . . . : Diagnostic
Date sent . . . . . . : 11/03/17 Time sent . . . . . . : 14:39:11
Message . . . . : Information not available for release V7R3M0.
Cause . . . . . : Licensed Internal Code (LIC) does not have any
informati
regarding release V7R3M0.
Recovery . . . : See the Installing, upgrading, or deleting IBM i and
related software topic collection in the IBM i and related software
catego
in the IBM i Information Center for release V7R3M0
(http://www.ibm.com/systems/i/infocenter/) for information about
allocatin
additional Licensed Internal Code (LIC) space. See the topic on Perform
initial upgrade or replacement tasks to determine whether additional
space
is needed for release V7R3M0. Apply the required PTFs and try the
request
again.
--
Art Tostaine
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: https://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
https://archive.midrange.com/midrange-l.
Please contact support@xxxxxxxxxxxx for any subscription related
questions.
Help support midrange.com by shopping at amazon.com with our affiliate
link: http://amzn.to/2dEadiD
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.