Re: gnupg run on iseries

On Wed, 2016-10-05 at 19:10 -0400, tim wrote:

ok, getting closer. I used the following link to install the RPM and such:

http://www-01.ibm.com/support/docview.wss?uid=nas8N1011037

Looks like everything completed normally. when i try the RPM command i
get the following error:

rpm
exec(): 0509-036 Cannot load program rpm because of the following errors:
0509-150 Dependent module librpm.so could not be loaded.
0509-022 Cannot load module librpm.so.
0509-026 System error: A file or directory in the path name
does not exist.

anyh ideas?

I'm not overly sure... but if I had a similar problem on Linux I would
search for librpm* (find / -iname 'librpm*') to see 1: if it existed
and 2: if it existed as named, or if there was only a different version
(e.g. librpm3.so) if the former then a check of the path to see if the
library/directory is searched/included and if the latter I would try
creating a link (librmp.so > librpm3.so) if it then continued, but threw
up a similar problem I would start to look at if there was some
dependency that failed to be filled (sometimes happens when a
non-packaged program requires a cutting edge OS version, and more up to
date libs, and I'm using "stable") or some script that bailed before
creating a host of sim links.

On 10/1/16 6:28 PM, Vernon Hamberg wrote:

I'm going to assume, Tim, that you don't have wget - so let me jump in
with help on that - Aaron, of course, has been extremely helpful to me
on all this.

Go to https://bitbucket.org/litmis/ibmiperzl/downloads and get the
download file there - unzip it into, I think, /QOpenSys/downloads or
the like - there's more info at the page at
https://bitbucket.org/litmis/ibmiperzl

I think I'd be right to say that this litmis version of things is the
most correct at this time, there are similar downloads at the YIPs
site, and they might not be quite the same - I only know that the
litmis ones worked for me.

wget and rpm are a couple utilities that get deployed when using the
stuff at litmis - then you'll be able to install the stuff that is
INSIDE the RPM, as Aaron describes.

I hope this is sufficient to get you on your way - I admit to being a
pretty-much-total-noob on this stuff, although I did quite a bit of
playing with Debian about 20 years ago - yikes, it's been that long
that Linux has been around?

I recommend using things like wgetv and rpmv, to get a preview of what
will happen, as well. All part of what's in the litmis download.

Cheers
Vern


On 10/1/2016 5:05 PM, Aaron Bartell wrote:

Great question!

Time for a brief tutorial.

For those that don't now, rpm stands for "Redhat Package Manager".
Whenever I manually install rpm files I look at the ibmichroot project's
code (n1) for the syntax; in short:

$ wget
http://www.oss4aix.org/download/RPMS/gnupg2/gnupg2-2.0.26-1.aix5.1.ppc.rpm


$ rpm --ignoreos --ignorearch --nodeps --replacepkgs -hUv
gnupg2-2.0.26-1.aix5.1.ppc.rpm


But before you install that you need to install the dependencies
listed on the same page (n2), as shown below.


bzip2
curl >= 7.17.1
gettext
info
libassuan >= 2.0.0
libgcrypt
libgpg-error
libiconv >= 1.14-2
libksba
openldap >= 2.4.23
pth
readline >= 5.2
zlib


When you visit the gnupg2 page (n2) you will see those dependencies
listed
with links to each. Do a wget (as shown above) for each of the rpms and
then install them using the aforementioned command, replacing the last
portion with the name of each rpm file.

n1 - http://bit.ly/2dgEK9W
n2 - http://bit.ly/2dgEh7A

[I type this while waiting for my pork steaks to thaw :-)]

On final note, Tony Cairns (IBMer) is working to port YUM to IBM i(n3).
YUM simplifies this process by only requiring you to run the following
command to install gnupg and it will take care of installing the
dependencies:

$ yum install gnupg

n3 - http://bit.ly/yum-is-coming-to-ibmi

​Hope that helps,​
Aaron Bartell
litmis.com - Services for open source on IBM i


On Sat, Oct 1, 2016 at 8:56 AM, tim <iseriesstuff@xxxxxxxxx> wrote:

i installed scotts version and it works great. i tried the link aaron
provided and it points to an RPM file type. How do i install this?



On 9/30/16 9:39 AM, Aaron Bartell wrote:

It's available: http://www.perzl.org/aix/index.php?n=Main.Gnupg2

I have not yet tried to run it.

Aaron Bartell
litmis.com - Services for open source on IBM i


On Fri, Sep 30, 2016 at 8:06 AM, tim <iseriesstuff@xxxxxxxxx> wrote:

i was wondering if gnupg can run on the iseries. im currently using
this

app on a pc to encrypt/decrypt files and would like to do it
native if i
can.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.