× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Our Cisco network group calls this EtherChannel instead of Link Aggregation and appear to know what is needed on the switch side.

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Massiello - ML
Sent: Wednesday, July 13, 2016 10:55 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: RE: Aggregate Ethernet Lines

I have done it a few times, and it works great. The issue is in talking to the network guys and the terminology that you use. The guys seems to understand Link Aggregation. Using CISCO equipment has worked with the shops I have installed it with, but then one time we tried it with some network switch vendor I never heard of and they had to do a few different configurations on the switch before I got it to work

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com

Office: 203-744-7854



-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mike Cunningham
Sent: Wednesday, July 13, 2016 1:25 PM
To: Midrange Systems Technical Discussion
Subject: Aggregate Ethernet Lines

Last November we installed a new Power8 server and are running V7.1. We have two 4 port NICs with only three ports on one NIC being used. When we did the install we didn't have a network switch that could be configured for automatic failover so we didn't configure the iSeries for aggregation. Now we do have an upgraded switch and can do the setup. We have never done this before. I found this document http://www.ibm.com/developerworks/ibmi/library/i-ethernetlines/ for configuring the NIC side. It does not talk at all about changes to the switch side. Has anyone done this kind of setup and come across any issues ?

Thanks

Mike Cunningham
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.