× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  1.  Home
  2. MIDRANGE-L
  3. April 2015

RE: Power7 Firmware update question - HMC code level

HMC upgraded to 8820 MH01454 ; MH01486.
This really took some work and long.
Downloading all the iso , SP, fixes - about 4 hours.
6 HMC reboots over the course, each about 1/2 hour

I'd still like to confirm if could have done this without burning either the 779 or 882 base iso to DVD-R.
IBM HMC support is stating this is still required for code updates, on the restart, HMC will boot from DVD and process the code update.
SP, firmware are fine from USB.

I've read posts that others have done this without burning iso to DVD
I do see in the tech doc, an option Download direct from IBM to HMC, I inquired about this, not recommended.
I do see another option - Optional: Using a local server

Is this possibly what others are referring to?
This option I believe requires restricted shell access via Putty or other client.


1. Use FTP to do a binary download of the upgrade files from the IBM server to a directory on a local FTP server:

IBM Server: ftp.software.ibm.com/software/server/hmc/network/v7790
Files: (if you use the mget command, be aware that bzImage does not have a file extension)
bzImage
disk1.img
disk2.img
disk3.img
hmcnetworkfiles.sum
initrd.gz

2. Perform the upgrade as described above. However, in Step 7, modify the getupgfiles command to point to your local FTP server. For example:

getupgfiles -h myserver -u myuserid --passwd mypassword -d /mydirectory

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Friday, April 17, 2015 4:16 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power7 Firmware update question - HMC code level

HMC upgrade from 7.7.7.0 to 7.7.7.9 using DVD R complete.
IBM is stating I can use USB for SP, Firmware, and backups.
But still insisting the upgrades must be done from DVD R, (iso needs to be burned to a DVD)

Downloading SP1 and 8820.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Friday, April 17, 2015 10:25 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power7 Firmware update question - HMC code level

It's in the documentation somewhere. I know that remote updates/upgrades of the HMC work too although I have not done a remote upgrade yet.
Not it a position to look it up myself right now.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Friday, April 17, 2015 9:20 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power7 Firmware update question - HMC code level

Jim,

How and where do I do that?

Is there a doc or link?

Paul



-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Friday, April 17, 2015 10:17 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power7 Firmware update question - HMC code level

Not true, do it all the time.

The Flash drive does need to be set up as a bootable device.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Friday, April 17, 2015 8:53 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Power7 Firmware update question - HMC code level

Rob,

Did a flash drive work for HMC code upgrade. I'm being told that HMC will only boot from the DVD-ram, can't do the upgrade via flash drive.

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 3:30 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level

I've used about all those options.
With my new HMC's I started out with new DVDs. Major upgrades I use flash drives. For service packs and whatnot I've done via ftp directly from the HMC.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/15/2015 03:09 PM
Subject: RE: Power7 Firmware update question - HMC code level
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Rob,

Thanks for links.
I'm planning on going to 8.8.2.0 SP1.
However, this will need to be a two step.
7.7.7.0 to 7.7.7.9 SP 1
7.7.7.9 SP1 to 8.8.2.0 SP1.

1) Which upgrade option do you use?
Iso images ; Ordering/using DVDs/CD ; Download Direct from IBM to HMC

2) Have you ever used flash drive for code updates?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 2:18 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level

The level of HMC code has reached "End of Service Pack Support" as shown by http://www-304.ibm.com/support/customercare/flrt/matrix?domain=mtm=8205-E6C&;
pkey=pwr


From:
http://delivery04.dhe.ibm.com/sar/CMA/HMA/04x1x/2/MH01453.readme.html
HMC V8 R8.2.0 supports the following HMC models:
Deskside: C08
Rack Mount: CR5, CR6, CR7, and CR8
HMC V8 R8.2.0 does not support models CR2, CR3, CR4 and C03, C04, C05, C06, C07.



Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/15/2015 01:46 PM
Subject: RE: Power7 Firmware update question - HMC code level
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



HMC model 7042 CR6

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 12:51 PM
To: Midrange Systems Technical Discussion
Subject: Re: Power7 Firmware update question - HMC code level

You neglected to say what model of HMC you had. This does have a bearing on what version of HMC code to run. We replaced all of our HMCs to upgrade to ones that could run newer HMC code and support above Power 6 hardware.

We're at HMC code 8.8.2.0 SP1. Been running this for a month now.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/15/2015 11:51 AM
Subject: Power7 Firmware update question - HMC code level
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



8205 E6C - V7R1 HMC managed.
HMC at 7770 SP 3 MH01409 ; MH 01422
Firmware currently at : AL740_152_042 MH01418 06/30/14

AL740_156_042 became available 02/02/15.

From the readme, this firmware is both Not deferred and NON Pervasive, so can be applied immediately with no IPL.

I meet the minimum HMC code level, but higher HMC code level is recommended.
The Minimum HMC Code level for this firmware is: HMC V7 R7.4.0 (PTF
MH01273 or MH01274) with PTF MH01275 (Mandatory efix).

Although the Minimum HMC Code level for this firmware is listed above, HMC


V7 R7.9.0 Service Pack 1 (PTF MH01428) with security fix (PTF MH01473) and POODLE fix (PTF MH01484) or higher is recommended.

Any thoughts from the group?

http://www-912.ibm.com/s_dir/slkbase.nsf/ibmscdirect/b871e720ba7f47fe86257dd
3005e767a?OpenDocument&TableRow=3.1.5%2C3.3#3.1


.

ftp://ftp.software.ibm.com/software/server/firmware/01AL740_156_042.html



Thank You
_____
Paul Steinmetz
IBM i Systems Administrator

Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071

610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home

psteinmetz@xxxxxxxxxx
http://www.pencor.com/




--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...
Follow-Ups:
Replies:
Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.