HMC model 7042  CR6
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 12:51 PM
To: Midrange Systems Technical Discussion
Subject: Re: Power7 Firmware update question - HMC code level
You neglected to say what model of HMC you had.  This does have a bearing on what version of HMC code to run.  We replaced all of our HMCs to upgrade to ones that could run newer HMC code and support above Power 6 hardware.
We're at HMC code 8.8.2.0 SP1.  Been running this for a month now.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to:  2505 Dekko Drive
          Garrett, IN 46738
Ship to:  Dock 108
          6928N 400E
          Kendallville, IN 46755
http://www.dekko.com
From:   "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To:     "'Midrange Systems Technical Discussion'" 
<midrange-l@xxxxxxxxxxxx>
Date:   04/15/2015 11:51 AM
Subject:        Power7 Firmware update question - HMC code level
Sent by:        "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
8205 E6C - V7R1 HMC managed.
HMC at 7770 SP 3  MH01409 ; MH 01422
Firmware currently at : AL740_152_042  MH01418  06/30/14
AL740_156_042 became available 02/02/15.
From the readme, this firmware is both Not deferred and NON Pervasive, so 
can be applied immediately with no IPL.
 I meet the minimum HMC code level, but higher HMC code level is 
recommended.
The Minimum HMC Code level for this firmware is:  HMC V7 R7.4.0 (PTF 
MH01273 or MH01274) with PTF MH01275 (Mandatory efix).
Although the Minimum HMC Code level for this firmware is listed above, HMC 
V7 R7.9.0 Service Pack 1  (PTF MH01428) with security fix (PTF MH01473) 
and POODLE fix (PTF MH01484) or higher is recommended.
Any thoughts from the group?
http://www-912.ibm.com/s_dir/slkbase.nsf/ibmscdirect/b871e720ba7f47fe86257dd3005e767a?OpenDocument&TableRow=3.1.5%2C3.3#3.1
.
ftp://ftp.software.ibm.com/software/server/firmware/01AL740_156_042.html
Thank You
_____
Paul Steinmetz 
IBM i Systems Administrator 
Pencor Services, Inc. 
462 Delaware Ave 
Palmerton Pa 18071 
610-826-9117 work 
610-826-9188 fax 
610-349-0913 cell 
610-377-6012 home 
psteinmetz@xxxxxxxxxx 
http://www.pencor.com/
As an Amazon Associate we earn from qualifying purchases.