|
Date: Wed, 15 Apr 2015 15:43:39 -0500
From: diegokesselman@xxxxxxxxx
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Power7 Firmware update question - HMC code level
Sorry, but DON'T install SP2 on your HMC. Once I installed it I wasn't
able to connect to my P7 server.
El 15/04/2015 a las 03:07 p.m., Steinmetz, Paul escribió:
Finding anything on an IBM site is a challenge.
Which 7790 should I be downloading?
Security Fixes for OpenSSL for HMC V7R7.9.0M0
The following files implement this fix.
MH01435.iso (4.39 MB)
Below are the requisite fixes for this fix.
release level: MH01405
Description
HMC Recovery V7R7.9.0M0
The following files implement this fix.
HMC_Recovery_V7R790_1.iso(2.15 GB)
HMC_Recovery_V7R790_2.iso(833.8 MB)
interim fix: MH01406
Description
Mandatory efix for HMC V7R790
The following files implement this fix.
MH01406.iso(882.7 MB)
release level: MH01405
Description
HMC Recovery V7R7.9.0M0
The following files implement this fix.
HMC_Recovery_V7R790_1.iso (2.15 GB)
HMC_Recovery_V7R790_2.iso (833.8 MB)
release level: MH01405
Description
HMC Recovery V7R7.9.0M0
The following files implement this fix.
HMC_Recovery_V7R790_1.iso (2.15 GB)
HMC_Recovery_V7R790_2.iso (833.8 MB)
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 3:43 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level
<snip>
When I'm doing just the HMC I usually just put the code on the IBM i and get it from there.
</snip>
Yeah, me too. I seem to have difficulties sometimes trying to download from IBM's ftp site (finding it is the first trick).
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/15/2015 03:35 PM
Subject: RE: Power7 Firmware update question - HMC code level
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Downloading the files to an FTP site inside your network works extremely
well.
When I'm doing just the HMC I usually just put the code on the IBM i and
get
it from there.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 2:30 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level
I've used about all those options.
With my new HMC's I started out with new DVDs. Major upgrades I use flash
drives. For service packs and whatnot I've done via ftp directly from the
HMC.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/15/2015 03:09 PM
Subject: RE: Power7 Firmware update question - HMC code level
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Rob,
Thanks for links.
I'm planning on going to 8.8.2.0 SP1.
However, this will need to be a two step.
7.7.7.0 to 7.7.7.9 SP 1
7.7.7.9 SP1 to 8.8.2.0 SP1.
1) Which upgrade option do you use?
Iso images ; Ordering/using DVDs/CD ; Download Direct from IBM to HMC
2) Have you ever used flash drive for code updates?
Paul
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 2:18 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level
The level of HMC code has reached "End of Service Pack Support" as shown
by
http://www-304.ibm.com/support/customercare/flrt/matrix?domain=mtm=8205-E6C&
pkey=pwr
From:
http://delivery04.dhe.ibm.com/sar/CMA/HMA/04x1x/2/MH01453.readme.html
HMC V8 R8.2.0 supports the following HMC models:
Deskside: C08
Rack Mount: CR5, CR6, CR7, and CR8
HMC V8 R8.2.0 does not support models CR2, CR3, CR4 and C03, C04, C05,
C06, C07.
Rob Berendt
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.