Thanks Jim,
Unfortunately that is not an option, the hardware won't run V5R3. Also, the customer will not allow us to restore again.
What I did do was:
1) Load OS from a V5R4 tape
2) Restore QUSRSYS *NEW objects from the V5R3 tape
3) Update the QUSRSYS LICPGM from DVD to V5R4
Now I'm considering:
1) Restore QUSRSYS with option *ALL from the V5R3 tape (And *ALWOBJDIF *YES). Presumably this will put QUSRSYS in back level, so then,
2) Update QUSRSYS from the V5R4 DVD.
What are your thoughts on that approach?
Thanks
-----------------------------------------------------------------------
date: Thu, 9 Apr 2015 14:03:15 -0500
from: "Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx<mailto:midrangel@xxxxxxxxxxxxxxxxx>>
subject: RE: DIRE issue
Adam,
QUSRSYS is where all of that is stored and it's very likely it's hosed up.
You performed a "downgrade" of QUSRSYS/QGPL when you restored the older
version over the top of the new one. The proper procedure would have been,
load V5R4 LIC and OS. Restore QUSRSYS/QGPL then upgrade them to V5R4 with
the V5R4 save.
Any way you cut it objects are going to get bollixed up since they were not
the same system to start with.
The classic definition of Al Barsa's "MAKEAMESS" command.
I suggest you rebuild the V5R3 partition from its save, and then upgrade it.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
Adam Driver
Chicago, IL
T: 847-916-9499
M: 224-250-9049
www.linkedin.com/adamdriver<
http://www.linkedin.com/adamdriver>
[Description:
http://www.quinnox.com/images/email-sig/quinnox-branding-logo.png]
[Description:
http://www.quinnox.com/images/email-sig/facebook_icon.png]<
https://www.facebook.com/QuinnoxInc>
[Description:
http://www.quinnox.com/images/email-sig/Twitter_icon.png]<
https://twitter.com/QuinnoxInc>
[Description:
http://www.quinnox.com/images/email-sig/linkedin_icon.png]<
http://www.linkedin.com/company/quinnox>
www.quinnox.com<
http://www.quinnox.com/>
________________________________
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute, print or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. Any views or opinions presented in this email are solely those of the author and do not necessarily represent the views of the company. Although the company has taken reasonable precautions to ensure no viruses are present in this email, the company cannot accept responsibility for any loss or damage arising from the use of this email or attachments.
midrange.com
