Adam,
QUSRSYS is where all of that is stored and it's very likely it's hosed up.
You performed a "downgrade" of QUSRSYS/QGPL when you restored the older
version over the top of the new one. The proper procedure would have been,
load V5R4 LIC and OS. Restore QUSRSYS/QGPL then upgrade them to V5R4 with
the V5R4 save.
Any way you cut it objects are going to get bollixed up since they were not
the same system to start with.
The classic definition of Al Barsa's "MAKEAMESS" command.
I suggest you rebuild the V5R3 partition from its save, and then upgrade it.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Adam
Driver
Sent: Thursday, April 09, 2015 1:57 PM
To: midrange-l@xxxxxxxxxxxx
Subject: DIRE issue
Hi Everyone,
I rebuilt two systems, both V5R4 as follows:
System1 from a V5R4 full-save
System2 OS and IBM libs from the same tape, but libs and user profiles from
a different V5R3 tape.
The system names on both are different to what's on the tapes.
System1 is fine, WRKDIRE shows the old system name, but this seems to be
what they want. System2 appears to have the entries from System 1. Are these
entries restored with user profiles, or is there some object in one of the
IBM libs I could grab from the V5R3 tape?
Thanks
Adam Driver
Chicago, IL
T: 847-916-9499
M: 224-250-9049
www.linkedin.com/adamdriver<
http://www.linkedin.com/adamdriver>
[Description:
http://www.quinnox.com/images/email-sig/quinnox-branding-logo.png]
[Description:
http://www.quinnox.com/images/email-sig/facebook_icon.png]<
https://www.faceb
ook.com/QuinnoxInc>
[Description:
http://www.quinnox.com/images/email-sig/Twitter_icon.png]<
https://twitter.co
m/QuinnoxInc>
[Description:
http://www.quinnox.com/images/email-sig/linkedin_icon.png]<
http://www.linked
in.com/company/quinnox>
www.quinnox.com<
http://www.quinnox.com/>
________________________________
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not
the intended recipient, you should not disseminate, distribute, print or
copy this e-mail. Please notify the sender immediately and destroy all
copies of this message and any attachments. Any views or opinions presented
in this email are solely those of the author and do not necessarily
represent the views of the company. Although the company has taken
reasonable precautions to ensure no viruses are present in this email, the
company cannot accept responsibility for any loss or damage arising from the
use of this email or attachments.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
