RE: Two identical printers acting differently

Good point. Jack, try giving the printer that works the IP address of the
one that doesn't, and see if it still works properly.

One other question - do these printers have internal Ethernet cards, or do
they use Jet Direct boxes as the interface to the network?

Paul Nelson
Cell 708-670-6978
Office 409-267-4027
nelsonp@xxxxxxxxxxxxx

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jeff
Crosby
Sent: Thursday, March 05, 2015 1:25 PM
To: Midrange Systems Technical Discussion
Subject: Re: Two identical printers acting differently

Could the firmware levels in the printers be different?



On Thu, Mar 5, 2015 at 2:15 PM, Jack Tucky <jacktucky@xxxxxxxxx> wrote:

I have two laser printers (dont have the models but they are the same).
One listens to the number of copies shown in WRKSPLF one doesn't.


They are both setup as real Devices, not remote outqueues. I've compared
the device configs, they are identical.

I remember that certain remote outqueues would not support copies. But
this isn't the case for us.

Here is the retrieved source for the two devices.

CRTDEVPRT DEVD(LASER3) DEVCLS(*LAN) TYPE(3812) MODEL(1) +
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +
FONT(11 *NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) +
PRTERRMSG(*INQ) MSGQ(*CTLD) ACTTMR(2550) INACTTMR(*NOMAX) +
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +
TRANSFORM(*YES) MFRTYPMDL(*HP6) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) +
IMGCFG(*NONE) CHRID(*SYSVAL) RMTLOCNAME('192.168.1.136') +
SYSDRVPGM(*HPPJLDRV) +
PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +
(*UNKNOWN))

CRTDEVPRT DEVD(LASERY) DEVCLS(*LAN) TYPE(3812) MODEL(1) +
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +
FONT(11 *NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) +
PRTERRMSG(*INQ) MSGQ(*CTLD) ACTTMR(2550) INACTTMR(*NOMAX) +
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +
TRANSFORM(*YES) MFRTYPMDL(*HP6) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) +
IMGCFG(*NONE) CHRID(*SYSVAL) RMTLOCNAME('192.168.1.137') +
SYSDRVPGM(*HPPJLDRV) +
PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +
(*UNKNOWN))

Any ideas?

Jack
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.