Re: Two identical printers acting differently

I have two laser printers (dont have the models but they are the same).
One listens to the number of copies shown in WRKSPLF one doesn't.


They are both setup as real Devices, not remote outqueues. I've compared
the device configs, they are identical.

I remember that certain remote outqueues would not support copies. But
this isn't the case for us.

Here is the retrieved source for the two devices.

CRTDEVPRT DEVD(LASER3) DEVCLS(*LAN) TYPE(3812) MODEL(1) +
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +
FONT(11 *NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) +
PRTERRMSG(*INQ) MSGQ(*CTLD) ACTTMR(2550) INACTTMR(*NOMAX) +
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +
TRANSFORM(*YES) MFRTYPMDL(*HP6) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) +
IMGCFG(*NONE) CHRID(*SYSVAL) RMTLOCNAME('192.168.1.136') +
SYSDRVPGM(*HPPJLDRV) +
PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +
(*UNKNOWN))

CRTDEVPRT DEVD(LASERY) DEVCLS(*LAN) TYPE(3812) MODEL(1) +
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) +
FONT(11 *NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) +
PRTERRMSG(*INQ) MSGQ(*CTLD) ACTTMR(2550) INACTTMR(*NOMAX) +
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1) +
TRANSFORM(*YES) MFRTYPMDL(*HP6) PPRSRC1(*LETTER) +
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) +
IMGCFG(*NONE) CHRID(*SYSVAL) RMTLOCNAME('192.168.1.137') +
SYSDRVPGM(*HPPJLDRV) +
PUBLISHINF(*UNKNOWN *UNKNOWN *UNKNOWN *UNKNOWN *BLANK +
(*UNKNOWN))

Any ideas?

Jack
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.