The "lsmap -all -npiv" command does not work well because of the stupid
small window they provide for the feedback but you are correct it could be
done from there.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Patrick.Bingham@xxxxxxxxxxxxx
Sent: Friday, November 14, 2014 10:01 AM
To: Midrange Systems Technical Discussion
Subject: RE: VIOS iSCSI vs. Fibre Channel with NPIV
From the HMC if you go to the operations section of the VIOS partition it
will allow you to run any command. I still like to do things via ssh but
it's hard to break out of old habits.
-----Original Message-----
From: Jim Oberholtzer [mailto:midrangel@xxxxxxxxxxxxxxxxx]
Sent: Friday, November 14, 2014 8:27 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: VIOS iSCSI vs. Fibre Channel with NPIV
Sue,
-- IF -- all the storage was on the V3700 to start with yes I could have,
however I had to move it from internal storage to the V3700, so it
physically had to move. The most important thing was the only down time
was to copy the load source over. Converting to external storage just got
easy in a VIOS environment.
I have to admit, VIOS is starting to win me over particularly with the
management mainly in the HMC code. The only command I had to run on the
VIOS side was CFGDEV then a command or two to verify the Fibre logged in (it
did).
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Sue
Baker
Sent: Thursday, November 13, 2014 5:57 PM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: VIOS iSCSI vs. Fibre Channel with NPIV
"Jim Oberholtzer" <midrangel@xxxxxxxxxxxxxxxxx> wrote on Thu, 13 Nov 2014
21:41:59 GMT:
I just converted an LPAR from using Virtual SCSI under VIOS to a Fibre
Channel with NPIV. Steps were simple:
Jim, you did it the hardware .... You could have
1) create VFC ports
2) shutdown
3) add VFC ports to host
4) map the LUNs to the VFC host
5) IPL
No load source migration. No add/remove.
--
Sue
IBM Americas Advanced Technical Sales Support (ATS) Power Systems Rochester,
MN
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
This message (including any attachments) is intended only for the use of the
individual or entity to which it is addressed and may contain information
that is non-public, proprietary, privileged, confidential, and exempt from
disclosure under applicable law. If you are not the intended recipient, you
are hereby notified that any use, dissemination, distribution, or copying of
this communication is strictly prohibited. This message may be viewed by
parties at Sirius Computer Solutions other than those named in the message
header. This message does not contain an official representation of Sirius
Computer Solutions. If you have received this communication in error, notify
Sirius Computer Solutions immediately and (i) destroy this message if a
facsimile or (ii) delete this message immediately if this is an electronic
communication. Thank you.
Sirius Computer Solutions<
http://www.siriuscom.com>
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
