× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



You're welcome. I do that technique all the time when moving applications
from system to system.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Brian
Piotrowski
Sent: Monday, October 06, 2014 7:50 AM
To: Midrange Systems Technical Discussion
Subject: RE: Transferring Data from One iSeries box to another

Excellent. Thanks. :)

/b;

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim
Oberholtzer
Sent: Monday, October 06, 2014 8:47 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Transferring Data from One iSeries box to another

Brian:

If you have open ports on Ethernet cards on both systems, you can simply put
a patch cable between them (no crossover needed) and configure up a line.
Make sure to set up jumbo frames and the speed at 1Gb. You might also
consider looking at the TCP buffer size to increase that too.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Brian
Piotrowski
Sent: Monday, October 06, 2014 6:59 AM
To: Midrange Systems Technical Discussion (midrange-l@xxxxxxxxxxxx)
Subject: Transferring Data from One iSeries box to another

Good morning, everyone.

In the past our development box was in another building relative to our
production box. What we did on a nightly basis was copy over the previous
day's production data from PRD to DEV over the network. This made it quite
a task to copy all this data over and took up a lot of bandwidth and time.

However, I have migrated the boxes and now have both the PRD and DEV in the
same rack. Instead of copying everything across the network I would prefer
to link the boxes directly into each other so that movement of the data
would be much faster. I'm guessing I simply cannot connect the boxes
directly using a crossover cable, so what is the best method to link these
boxes together and copy everything over? Should I look at some type of
fiber channel solution? If so, what part numbers would I need.

Incidentally the PRD box is a 520 series box (i5) and the production box is
a 720+. Both are running 6.1.1.


Thankee-sai!

/b;

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Brian Piotrowski
Manager - I.T.
Simcoe Parts Service, Inc.
Ph: 705-415-0995
Fx: 705-435-5029
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
http://www.simcoeparts.com<http://www.simcoeparts.com/>

Please consider the environment. Don't print this e-mail unless you really
need to.

The information contained in this communication is confidential and intended
only for the use of those to whom it is addressed. If you have received
this communication in error, please notify me by telephone (collect if
necessary) and delete or destroy any copies of it. Thank you!

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.