Correct you only give it a size.
--
Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steinmetz, Paul
Sent: Friday, April 25, 2014 8:39 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: 70GB load source and 5 other drives
Rob and Pete,
I'm confused. When you create a network server storage for a guest LPAR, you only give it the size, no where do you tell it the number of drives. If the host lpar has 8 drives, 8 will be used. If the host lpar has24 drives all 24 will be used. The guest storage will be evenly spread across the number of drives of the host.
Is this correct?
Paul
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Massiello - ML
Sent: Friday, April 25, 2014 7:42 AM
To: Midrange Systems Technical Discussion
Subject: RE: 70GB load source and 5 other drives
Rob,
7.2 will need a 70GB load source, and that means when you create it on the guest side you have to create it larger than 70 to get 70 on the hosted (or client) side. I have been using approximately 79GB when I create them, and they have worked fine for 7.2. Then if the others are significantly smaller, I end allocations on that drive to keep the I/Os more balanced on the spread of the I/Os across the drives
Pete
--
Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Friday, April 25, 2014 7:18 AM
To: midrange-l@xxxxxxxxxxxx
Subject: 70GB load source and 5 other drives
I know that we covered this in a thread but I'm having a devil of a time finding it. I found it alluded to in
http://archive.midrange.com/midrange-l/201401/msg00542.html
I have a guested system that is currently 279GB. And it's only 30% utilized. I am doing an unload/reload and I want the 6 "luns".
I figured that I'd make the first one slightly over 70GB (like 75 or 80).
The reason being that it is a very hard halt with the next version of OS, especially with virtualized disks, and IBM will publish the 'pad' needed for VIOS, etc.
~300GB - 80GB = 220GB
220GB/(5drives/GB) = 44GB/Drive
So am I better off having 5 'luns' of 44GB each, or,
220GB/(35GB/drive)~=6 drives of 35GB each and having 6 drives of a somewhat standard size?
Or refigure the whole thing since it's only 30% utilized.
279 * .3 = 81GB
80GB load source and how many of what size additional CRTNWSSTG spaces?
Cause you can see just how much wasted space I'll have with 6 drives of 80GB.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
