Laine:
The answer to your question is yes you should change that system value and
reboot IBM i. It will come up with QCTL as the controlling subsystem and
QINTER and QBATCH will be started.
As suggested below the article Bryan is still very valid.
You will find your ability to manage the jobs on your system will be
significantly enhanced by that small but very significant change.
You should also check to be sure the following system values are set:
QPFRADJ is set to 3 - automatic adjustment
QDYNPTYADJ is set to 1 - On
QDYNPTYSCD is set to 1 - On.
Those are the defaults so they most likely still are set that way. That
will avoid some memory allocation issues right after the change.
More advanced memory management etc. will be available to you after these
changes.
--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of TheBorg
Sent: Wednesday, February 19, 2014 9:38 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: Controlling Job Types
Old, but still valid:
http://iprodeveloper.com/systems-management/crash-course-work-management-par
t-1
-sjl
"Laine, Rogers" wrote in message
news:mailman.2900.1392823558.25182.midrange-l@xxxxxxxxxxxx...
Hello,
I'm running v6.1 and have some questions on how to control what subsystem
Batch and Interactive jobs are processed.
What I'm trying to accomplish is to control access to the system for all
application type users by stopping their subsystem(QINTER).
We currently have QCTLSBSD set at QBASE which is the shipped default.
From what I have read all job types are run under this subsystem. This
appears to be true for our current work load.
The application users profiles have Job Description of RMS61 with Library of
QGPL.
Now if I changed QCTLSBSD to QCTL it will start the below subsystems...
QINTER ==== Interactive Started with QCTL
QBATCH ==== Batch Started with QCTL
QSPL ==== Spooling Started with either QBASE or QCTL
QCMN ==== Communication Started with QCTL
QSERVER === File Server Started with either QBASE or QCTL
So will my Interactive users now run under QINTER and the Batch jobs run
under QBATCH without changes the Job Description?
Thanks,
Rogers
************************************************
This E-Mail transmission (and/or the documents accompanying it) may contain
information belonging to the sender which is confidential, privileged and/or
exempt from disclosure under applicable law. The information is intended
only for the use of the individual(s) or entity named above. If you are not
the intended recipient, you are hereby notified that any disclosure,
copying, distribution or the taking of any action in reliance on the
contents of this information is strictly prohibited. If you have received
this E-Mail transmission in error, please immediately notify us by return
E-Mail or telephone to arrange for return of its contents including any
documents.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
