Re: Migrate iTERA to PowerHA

And rich cat -- vs. poor cat.

Meaning SAN = expensive (as a general rule as compared to internal disk)

SAN disk add quite a bit of flexibility, security, and resilience to the data center. They also add a massive skill set to manage them, software license/maintenace fees to choke even the largest horse, and a fair piece of complexity to the equation.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 5/21/2013 2:07 PM, Patrick.Bingham@xxxxxxxxxxxxx wrote:

With geographic mirroring and internal disk you are correct. With external storage, we have the option of make a flash copy of the iASP before the upgrade and switch. If the switch and conversion fail and you have to "go back" to the previous release, we can vary off the iASP, reverse the flash copy, and then bring it back up on the older release partition.

Many ways to skin the cat....


Patrick Bingham | Principal Power Systems Engineer
Office: 402.965.2381 | Mobile: 402.212.2944 |Patrick.Bingham@xxxxxxxxxxxxx
Sirius Computer Solutions |www.siriuscom.com
14301 FNB Parkway, Suite 400, Omaha, NE 68154



-----Original Message-----
From:rob@xxxxxxxxx [mailto:rob@xxxxxxxxx]
Sent: Tuesday, May 21, 2013 12:09 PM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate iTERA to PowerHA

<snip>
I don't think to many folks use PowerHA at V5R4 so the answer to your question is a bit different.
</snip>
I get that. I just tossed those out there as past examples of data conversions occurring due to an OS upgrade.

The impression I am getting is: If you're running on #1, upgrade OS on #2. Do your switch and quickly upgrade the OS on #1. Now, if it all goes to heck on the new OS you could try switching back and hope that any data conversions don't adversely affect anything.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Jim Oberholtzer<midrangel@xxxxxxxxxxxxxxxxx>
To: Midrange Systems Technical Discussion<midrange-l@xxxxxxxxxxxx>,
Date: 05/21/2013 12:58 PM
Subject: Re: Migrate iTERA to PowerHA
Sent by:midrange-l-bounces@xxxxxxxxxxxx



PowerHA has an Administrative Domain that can copy 80% of the *SYSBAS.
The HA Assist (iCluster) product gets you about another 15% over that.
There are some objects no one can replicate at an application level.

So the answer to your question is yes, PowerHA gets all the things you
were thinking of.

Upgrades happen just as with any other upgrade, although once an iASP
has been taken to V7R1, it cannot be reattached to a V6R1 system.

I don't think to many folks use PowerHA at V5R4 so the answer to your
question is a bit different.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 5/21/2013 11:29 AM,rob@xxxxxxxxx wrote:

> So this doesn't copy stuff like user profiles, object ownership and that
> stuff?
>
> I guess I can see leaving some of this stuff out of the iasp, like the

key

> assigned to a vendor package. Stuff we already deal with in Mimix type

of

> environments.
>
> What about the object conversions I mentioned earlier: stream file

type1

> to type2, STROBJCVN, etc. Any of that a factor during the upgrade?
>
>
> Rob Berendt
> -- IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept
> 1600 Mail to: 2505 Dekko Drive Garrett, IN 46738 Ship to: Dock 108
> 6928N 400E Kendallville, IN 46755http://www.dekko.com From: Jim
> Oberholtzer<midrangel@xxxxxxxxxxxxxxxxx> To: Midrange Systems
> Technical Discussion<midrange-l@xxxxxxxxxxxx>, Date: 05/21/2013 11:52
> AM Subject: Re: Migrate iTERA to PowerHA Sent by:
> midrange-l-bounces@xxxxxxxxxxxx With PowerHA all the customer data is
> in an iASP leaving *SYSBAS to only the OS and LPP. (and stuff that has
> to be there that the administrative domain or HA Assist replicate) So
> you push the iASP over to the second system in the cluster, vary it on
> and away you go. Now number 1 only has *SYSBAS attached. Upgrade/Apply
> PTFs at your pleasure during working hours. When done bring the
> cluster back and repeat with number two. Most folks actually have two
> copies of the iASP in separate locations rather than just doing the
> clustering described above. It's all part of clustering. Jim
> Oberholtzer Chief Technical Architect Agile Technology Architects On
> 5/21/2013 10:29 AM,rob@xxxxxxxxx wrote:

>> > I think this has been answered before so forgive my continuing

doubts.

>> > But is this setup sort of like:
>> >
>> > Power 7 #1
>> >
>> > connected to SAN
>> >
>> > Power 7 #2
>> >
>> > You do some magic that says run on #2 now. Both #1 and #2 are using

the

>> > same SAN but only one can be 'live' at a time?
>> >
>> > How does one upgrade the OS? Wouldn't that require some outage?
>> > Considering that part of the OS may be a conversion like changing

stream

>> > files from TYPE1 to TYPE2 (remember that?), strobjcvn, all the

system

>> > cross reference files, etc.
>> >
>> >
>> > Rob Berendt
>> > -- IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept
>> > 1600 Mail to: 2505 Dekko Drive Garrett, IN 46738 Ship to: Dock 108
>> > 6928N 400E Kendallville, IN 46755http://www.dekko.com
>> > --

> --

--