Re: HMC System Plan Question

Thank you for your quick responses.

Since this is a dead end. I am looking at the SCSI attachment that is
connected via a 571A-001 card. I see that both P1-C1 are on both LPAR's
when reviewing the wrkhdwrsc *stg command but it has a Tape and DVD
(secondary) on the card.

Therefore, my question is whether I have to keep moving them from one LPAR
to another when needed (using the HMC System Plan)? Or can this been done
some other way? I have very limited knowledge on whether this can be
done.


Orville Meredith
Systems Analyst

Gecom Corporation
1025 Barachel Lane
Greensburg, IN 47240

orville_meredith@xxxxxxxxxxxxx

812-663-1745 (T)
812-663-2230 (F)




From: DrFranken <midrange@xxxxxxxxxxxx>
To: Midrange Systems Technical Discussion
<midrange-l@xxxxxxxxxxxx>,
Date: 01/15/2013 09:26 AM
Subject: Re: HMC System Plan Question
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Orville,

What system unit is this? Generally the DVD is connected to
the RAID
card in the System Unit so you'd need to move that. You might recall
that often Disk Units are attached to that RAID card which makes moving
the DVD problematic. :-)

- Larry "DrFranken" Bolhuis

www.frankeni.com
www.iDevCloud.com
www.iInTheCloud.com

On 1/15/2013 9:09 AM, Orville_Meredith@xxxxxxxxxxxxx wrote:

I am needing to move the U78AA.001.WZSGK47-P2-D2 (internal DVD drive)

from

one LPAR to another LPAR. Using the HMC, I checked Hardware I/O tab
within partition that currently controls DVD and could not find it. Also
checked the IBM manual for this device and only found out what location

it

should be at (P2-D2).

Known facts:
HMC is at V7R7.4.0.2
System is a 720 (8202-E4B)
Controller for U78AA.001.WZSGK47-P2-D2 is U78AA.001.WZSGK47-P1-C13

Any help would be appreciated.




Orville Meredith
Systems Analyst

Gecom Corporation
1025 Barachel Lane
Greensburg, IN 47240

orville_meredith@xxxxxxxxxxxxx

812-663-1745 (T)
812-663-2230 (F)

== This message has been scanned for viruses ==

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.