Re: printing boilerplate info on a form -- MIDRANGE-L

I think I heard of some API or table that contained character widths for various fonts - I've always wondered if this could be used to format text in proportional fonts on the fly. Have never pursued it, though. Maybe someone else knows about this.

Vern

On 7/17/2012 4:58 PM, Stone, Joel wrote:

OK Thanks

We use the Word build and store as a page segment now. I was hoping that there was a more elegant method using Iseries physical file data.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pat Barber
Sent: Tuesday, July 17, 2012 3:18 PM
To: Midrange Systems Technical Discussion
Subject: Re: printing boilerplate info on a form

Creating a page segment or overlay is the way to handle that and you
will not be stuck with fonts that can't be scaled.

You can do either one using a pc application like Word but I prefer
Open Office Draw, which allows you to create raster based files that
afp print drivers can handle. The resulting print file is then used to
create
an overlay using Navigator.

You can use any font you want and the results can be very nice.
You will need 30 minutes including testing.

All of this can be stored in IFS.

The advanced printing you want requires learning these skills.

You can also do all of what you want using dds and learning some
things about various fonts. I am not aware of any printing function
that "wraps" a field. I am sure you can key the wording in a format
that looks correct. That will require more screwing around than is
necessary.

On 7/13/2012 12:57 PM, Stone, Joel wrote:

Using AFPDS with external printer file(DDS).

Within the bottom 3 inches of the form, I want to print the usual legal mumbo-jumbo such as:

<company> makes no representation, warranty or guarantee of any kind, express or
implied, to customer or any third party, including, without limitation, with
respect to the completeness of the cleaning. Customer hereby relieves CHS Inc.,
its owners and employees from, and shall indemnify, defend and hold harmless such
parties from and against any and all claims, demands, causes of action, damages,

etc
etc

The form will print on the usual 8.5 x 11 portrait.

How can I structure the DDS print lines so that the text somewhat wraps at the end of line?

I found an OK font

A* Legal Disclaimer line 1 *
A PLDLN01 83 2
FONT(2304 (*POINTSIZE 8))
A SPACEB(005)

Is the only method to make the field length 150 or so and trial and error until it looks right?

Is there a way to make the DDS field length 2000 or so and have it wrap when it gets near the right edge?

Thanks

______________________________________________________________________
This outbound email has been scanned for all viruses by the MessageLabs Skyscan service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________