× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



A VTL is what you need. In our case the SPHiNX is Fibre attached so it can be varied on/off on each partition. It also has a port that can replicated to another SPHiNX at the remote site. (data compression on the com line helps a lot there) Once the data is on the Remote unit, it can be restored to any system. Happens automatically.

As to the Intel data. If you just back up the network storage areas you'll get the images of the servers that can be restored. Some of my customers will also have an Intel backup package on the box to back up file level data to the VTL as well. Either way it's all on the same VTL system and can be replicated to the remote site.

Push to tape from the VTL as your audit and legal requirements push you to. The VTL does that for you assuming the tape is connected to the VTL instead of the system.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 5/14/2012 10:33 AM, Anderson, Kurt wrote:
I would also be curious about backing up a Power system's db2 remotely with the ability to restore remotely as well.

-Kurt

-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Anderson, Kurt
Sent: Monday, May 14, 2012 10:23 AM
To: Midrange Systems Technical Discussion
Subject: RE: iSCSI network questions

We'd be backing up Windows data that is stored on the Power machine. In addition system saves should be an option as well.

Thanks for the feedback,

Kurt

-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jim Oberholtzer
Sent: Monday, May 14, 2012 10:07 AM
To: Midrange Systems Technical Discussion
Subject: Re: iSCSI network questions

It depends. Are you backing up primarily IBM i information with some Intel? Then I would use a Virtual Tape library with a replication package to push the backups off site. We use Crossroads SPHiNX for that purpose, but IBM and others have a box as well.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 5/14/2012 9:05 AM, Anderson, Kurt wrote:
> Thank you all for the responses. I have most of the information I need at this time. Although, could anyone chime in on this?
>
>>> >> 4. We'd be using a box off-site. Is remote backup a possibility? My online searching has failed me. We do have a dedicated line to the off-site location.
> Thanks again,
> Kurt Anderson
>
> --
--

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.