Over all I'm pretty happy being *just* a programmer these days; no
management problems/concerns. But I have to admit that, at least in
situations like this, when I was a manager, I could just growl and say, "Do
it, damnit!".

The cranky (anti-System i) admin is my boss' son. Not much chance of
circumventing that roadblock, or installing "unapproved" software. After he
installed AVG anti-virus software on all of the PCs, *all* of the stores had
issues connecting. Naturally he blamed it on the System i, even after we
figured out that AVG was blocking us. But in that case, the message issued
wasn't from PC5250.

Since I can connect to the System i via Telnet running from a DOS command
box, I doubt that there's a firewall issue. Wouldn't the firewall have
blocked Telnet, too?

I spoke to the store manager a few minutes ago. She's going to re-boot the
PC when she can. Then she'll call me, and we'll see what we have.

Jerry C. Adams
IBM i Programmer/Analyst
They say some of my stars drink whiskey, but I have found that the ones who
drink milkshakes don't win many ball games. - Casey Stengel
--
A&K Wholesale
Murfreesboro, TN
615-867-5070


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Paul Nelson
Sent: Monday, March 05, 2012 3:17 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Remote Site Cannot Connect

As a back door solution, give that user a copy of Mochasoft TN5250. That's
what I use when there's a cranky/clueless network admin.

:-))

Paul Nelson
Office 512-392-2577
Cell 708-670-6978
nelsonp@xxxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jerry C. Adams
Sent: Monday, March 05, 2012 2:23 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Remote Site Cannot Connect

I saw the first two links, too.

There is a firewall (AVG) running, but the system admin gets rather, shall
we say, irked if I even look at his settings, and he ain't available right
now. On the other hand, the remote site (store) could connect last Friday.

I was able to connect via telnet from a DOS command window.

I ran the History Log. In addition to CWBCO1003, it showed CWBCO1011
(Remote port could not be resolved). It said something about using iSeries
Navigator to check the port, which I did, but I saw nothing in the
'Connection' tab about a bloody port (still could be the one "good" eye is
going bad).

I guess I'll get with the admin tomorrow (too late in the day to hassle with
him) about AVG and other possibilities. Though, theoretically, he's told me
that all of the PCs are set-up the same way.

Jerry C. Adams
IBM i Programmer/Analyst
You can never plan the future by the past. -Edmund Burke
--
A&K Wholesale
Murfreesboro, TN
615-867-5070


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Monday, March 05, 2012 12:52 PM
To: Midrange Systems Technical Discussion
Subject: Re: Remote Site Cannot Connect

My first google hit was
http://www-03.ibm.com/systems/i/software/access/linux/guide/cwbcoer.html

I looked at CWBCO1003 and 4 (3 suggests that also). With the reference code
you've given, it suggests that you do what you did: ping, etc.

Googling on both the CWBCO1003 (notice one letter o and two number zeros?).
and 10013 also shows this
http://www-01.ibm.com/support/docview.wss?uid=nas168a2f7d1eed4f6338625798a00
5de2c8
possible firewall issue? See also
http://www-01.ibm.com/support/docview.wss?uid=nas1acc12fda96496e4b8625668f00
7ab75f
Try using telnet from DOS and see if that gets there?


Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Jerry C. Adams" <midrange@xxxxxxxx>
To: "Midrange-L" <midrange-l@xxxxxxxxxxxx>,
Date: 03/05/2012 01:42 PM
Subject: Remote Site Cannot Connect
Sent by: midrange-l-bounces@xxxxxxxxxxxx



This is only occurring at one remote location. When they double-click the
desktop icon (iSeries Access for Windows - PC5250), they get a "PC5250
License Error: CWBCO1003 - Sockets error, function returned 10013 (with
our
IP address)".



I couldn't find anything regarding this function code in the Archives,
Google, or the "Details" box of the error message.



I can take over the site's PC, which I did.



I ran Ping on the remote PC (which, by the by, is running XP Pro at SP3).
It hit our iSeries box.



I ran cwbping. All services, most notably Telnet, connected fine.



I tried configuring a new session. Same error.



Oddly enough (to me, anyway) the Data Transfer icon works fine.



Uh, I'm stumped.



Jerry C. Adams

IBM i Programmer/Analyst

Toleration is good for all, or it is good for none. -Edmund Burke

--

A&K Wholesale

Murfreesboro, TN

615-867-5070




This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].