Re: Xerox 5135 drawer select

Stopped writer, varied off DEVD, changed the DEVD to use MFR
*LEXOPTRAT., varied back on and started writer.

Went to the other location.

From PDM, printed the source of the WSCST. Sent to the printer.

Bypass tray was open and empty. Printer wanted 8 1/2 x 11 in bypass.
Cancelled job, closed bypass, reprinted source. Got same message.

To create the WSCST, I used an existing WSCST. The existing one
forced portrait, which was also what was requested in this area. At
the bottom was this:

:ADDDRWTBLE
NUMBER= 3
DATA = '1B266C3438'X.

Near the top is this:

:DWRSLT
DRAWER=DRAWER1
DATA = '1B266C3848'X.

I changed the DATA line to match what was listed for Drawer 3.



So, either 1) I need to change something else
2) I need to change additional code
or (I know - reaching here)
3) Printer has an issue

More likely to me, is that I need to change additional code.

I don't know how a Xerox works internally. But, I know that a Lexmark
will rotate among installed paper trays that are linked to find the
right type. Doesn't seem to be happening here.

John McKee



On Wed, Feb 29, 2012 at 10:39 AM, Pat Barber <mboceanside@xxxxxxx> wrote:

IBM even has a video on how to select the correct  wscst model

http://www.youtube.com/user/IBMiGSC



On 2/29/2012 8:13 AM, Paul Nelson wrote:

IBM is very big on having you use the LEXOPTRAT mfrtypmdl

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.