RE: How much disk ?

WRKDSKSTS on a hosted partition shows the number of virtual disks that have been assigned to the hosted partition.

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Thursday, January 05, 2012 1:32 PM
To: Midrange Systems Technical Discussion
Subject: Re: How much disk ?

WRKSYSSTS on a guested partition does NOT show the same number as the partition hosting it. It will be smaller.

WRKDSKSTS on a guested partition does NOT show the same number of disks as the partition hosting it.

So I am trying to figure out what he is seeing.

Rob Berendt
--
Group Dekko
Dept 1600
Mail to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Jim Oberholtzer <midrangel@xxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>,
Date: 01/05/2012 12:52 PM
Subject: Re: How much disk ?
Sent by: midrange-l-bounces@xxxxxxxxxxxx



Jerry:

Do I read into your comment that at least two of the three partitions
are hosted by IBM i? If that's so you can use WRKNWSSTG to determine
how much space is allocated to each partition. I jump to that
conclusion because that is the only way I am aware of that a WRKSYSSTS
command could show the storage for multiple partitions.

Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


On 1/5/2012 10:35 AM, GKern@xxxxxxxxxxxxxxxx wrote:

Thanks Larry - I did look at wrksyssts and that tells me my total system
asp (for all three partitions).

Wrkdsksts shows the same thing on all three partitions - 12 disks, all

the

same size - just different percentage used.

I know we have plenty of space - we just want to know how much is
allocated to our domino partition.

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx



From:
DrFranken<midrange@xxxxxxxxxxxx>
To:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:41 AM
Subject:
Re: How much disk ?



SST is certainly one way. Or in the O/S WRKDSKSTS gets you what you

need

also. And then WRKHDWRSC *STG will let you drill down the controllers

and

find the disk units as well. Normally you don't need to use SST if

you're

only after 'how many', 'what size', and 'what feature' (Meaning SAS -vs-
SCSI, RPM, etc.)

And of course WRKSYSSTS gets you the 50,000 ft flyover view of total
capacity and percent used if you don't care what type or protection of

the

disks.

- Larry

On 1/5/2012 10:31 AM,GKern@xxxxxxxxxxxxxxxx wrote:
Hi Larry,

No we aren't using VIOS. By traditional tools you mean SST?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx


From:
DrFranken<midrange@xxxxxxxxxxxx>
To:
Midrange Systems Technical Discussion<midrange-l@xxxxxxxxxxxx>
Cc:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:28 AM
Subject:
Re: How much disk ?




Jerry,

Good luck with that!:-) Are you using VIOS for hosting your other
partitions? If so you can find out the disk mappings for that. (I won't
detail that here unless you reply affirmatively)

If not then you need to look in each partition with the traditional
tools there.

- Larry "DrFranken" Bolhuis

On 1/5/2012 9:53 AM,GKern@xxxxxxxxxxxxxxxx wrote:

I spent some time in the HMC probing various options but didn't find
anything that resembled what I'm looking for.

Where do I find the total amount of disk, and where can I find how

much

is

allocated to each of my three partitions?

Thanks, Jerry

Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx