Thanks Larry - I did look at wrksyssts and that tells me my total system
asp (for all three partitions).
Wrkdsksts shows the same thing on all three partitions - 12 disks, all the
same size - just different percentage used.
I know we have plenty of space - we just want to know how much is
allocated to our domino partition.
Thanks, Jerry
Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx
From:
DrFranken <midrange@xxxxxxxxxxxx>
To:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:41 AM
Subject:
Re: How much disk ?
SST is certainly one way. Or in the O/S WRKDSKSTS gets you what you need
also. And then WRKHDWRSC *STG will let you drill down the controllers and
find the disk units as well. Normally you don't need to use SST if you're
only after 'how many', 'what size', and 'what feature' (Meaning SAS -vs-
SCSI, RPM, etc.)
And of course WRKSYSSTS gets you the 50,000 ft flyover view of total
capacity and percent used if you don't care what type or protection of the
disks.
- Larry
On 1/5/2012 10:31 AM, GKern@xxxxxxxxxxxxxxxx wrote:
Hi Larry,
No we aren't using VIOS. By traditional tools you mean SST?
Thanks, Jerry
Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx
From:
DrFranken <midrange@xxxxxxxxxxxx>
To:
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Cc:
GKern@xxxxxxxxxxxxxxxx
Date:
01/05/2012 10:28 AM
Subject:
Re: How much disk ?
Jerry,
Good luck with that! :-) Are you using VIOS for hosting your other
partitions? If so you can find out the disk mappings for that. (I won't
detail that here unless you reply affirmatively)
If not then you need to look in each partition with the traditional
tools there.
- Larry "DrFranken" Bolhuis
On 1/5/2012 9:53 AM, GKern@xxxxxxxxxxxxxxxx wrote:
I spent some time in the HMC probing various options but didn't find
anything that resembled what I'm looking for.
Where do I find the total amount of disk, and where can I find how much
is
allocated to each of my three partitions?
Thanks, Jerry
Gerald Kern - Information Technology
Programming Supervisor
IBM Certified RPG IV Developer
Lotus Notes/Domino 8.0.1 Administrator
The Toledo Clinic, Inc.
4235 Secor Road
Toledo, OH 43623
Phone 419-479-5535
gkern@xxxxxxxxxxxxxxxx
This e-mail message, including any attachments, is for the sole use of
the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.
This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.
This e-mail message, including any attachments, is for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized use, disclosure or distribution is
prohibited. If you are not the intended recipient, please inform the
sender by reply e-mail and destroy this and all copies of this message.
midrange.com
