Re: [Bulk] QDCRDEVD API Not Working as Advertised (or is it just me?)

["Mark S. Waterbury" <mark.s.waterbury@xxxxxxxxxxxxx>]

Hi, Jerry:

It's not just you; I just downloaded that example, compiled it, and it 
does not work as expected for me, either. *:-o*

Not sure what's wrong with that example ...

So, I just posted a version that works ... here:

http://code.midrange.com/28e310b0a2.html

HTH,

Mark

> On 3/22/2011 1:33 PM, Jerry C. Adams wrote:
> I have been trying to use the QDCRDEVD API to get the IP address used by a
> workstation.  I took CL code samples posted here and a sample program from
> IBM.  The latter can be found at
> http://www-01.ibm.com/support/docview.wss?uid=nas1ed43f4e3329a4a838625726c00
> 5d8be4 which I just copied and pasted, compiled and ran.
>
>
>
> The issue that I am having is that no matter what device id (job) I pass to
> the CL I always get 10.1.10.11.  Doesn't matter if it is a dynamic device
> created by Client Access, such as QPADEV0004, or a static device name, such
> as D2 [me].
>
>
>
> We have>20 retail stores that connect to our system (V5R2) over the 'Net
> with Client Access.  Each store has a static ip address so I was hoping to
> be able to identify each store based upon their IP address when they signed
> in.  I have not run this at any of the stores, only local devices.
>
>
>
> Any idea why everything gets reported as 10.1.10.11?
>
>
>
> Jerry C. Adams
>
> IBM i Programmer/Analyst
>
> Baseball.  The Boston Celtics and the Los Angeles Lakers could be playing
> for the championship, and I'd rather be watching the Angels and Yankees.
> -John Wooden
>
> --
>
> A&K Wholesale
>
> Murfreesboro, TN
>
> 615-867-5070