×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
I read part of the redbook and it says to "verify with your software
vendor that they have enabled their product to work in an iASP
environment..."
What exactly does that mean?
As I see it:
iASP = independent disk pools, not available until varied on after an ipl.
That means that you cannot reference libraries in an iAsp until the iAsp is varied om.
That means that you should not point usrprf initial programs, jobds and such to a library in an iAsp.
I guess I am trying to say that it is mostly a setup/installation issue.
If you are working with spoolfiles, remember that if they are placed in an iAsp same rules as above apply.
And DO NOT change INLLIBL in jobd QDFTJOBD to include a library in an iAsp.
The same goes for system userprofiles Q*.
Once the application is setup properly there won't be any differences running in iasp or in *sysbase.
Best regards
Stefan Tageson
AddconIT AB
Cell : +46 (0) 732 36 99 34
stefan.tageson@xxxxxxxxxxx
-------------------- Internet e-Mail Disclaimer --------------------
This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient you are notified that any use, disclosure, copying or distribution of the information is prohibited. In such case, you should destroy this message and kindly notify the sender by reply e-mail.The views expressed in this e-mail and any attachments are personal and, unless stated explicitly, do not represent the views of AddconIT. Furthermore, AddconIT will not be bound by this e-mail.
midrange.com
