Re: SRC 63A09300

Jack,

The good news is that performing a full power down and IPL cured
the problem. The bad news is that I would have like to have gotten
this fixed without having to resort to a re-boot. Too bad I didn't
have Rob's solution before me before taking the easy way out.

Rich Loeber
Kisco Information Systems
http://www.kisco.com
SDG
-------------------------

Quoting Rich Loeber <rich@xxxxxxxxx>:

Jack,

We're current on PTFs (running V5R4M5) and the tapes are all brand

new.

Already deleted and rebuilt the tape drive description. I'm
trying a full
power down cycle to see if that resets what needs resetting. I tried

to

vary on with a reset option, but that did not work either.

Rich Loeber - @richloeber
Kisco Information Systems
[1]http://www.kisco.com
SDG

--------------------------------------------------------------------------

On 1/31/2011 3:03 PM, Jack Kingsley wrote:

Clean the tape drive, check SST, delete recreat the tape drive. I saw

some

hits on this error where older tapes were involved and having to
wait on the
tape drive to rewind etc. You current on PTF's.

On Mon, Jan 31, 2011 at 2:42 PM, Rich Loeber [2]<rich@xxxxxxxxx>

wrote:

Hello list,

I have a new E4A system with a 4mm tape drive. I was just trying to
initialize a new tape when the drive went south on me. I deleted the
tape
description and created it from scratch, but it will not vary on now.
I'm getting a CPD2616 error (device will not vary on) with reason

code

00003404 which just says that an error occurred during the vary on
process. It says to check that the device is powered on, which it

is. I

am able to manually remove the tape cartridge and re-insert it just

fine.

Any ideas on where to go with this?

Seems kind of silly that it would throw up like this on a simple

INZTAP

command.

Rich Loeber - @richloeber
Kisco Information Systems
[1][3]http://www.kisco.com
SDG

References

Visible links
1. [4]http://www.kisco.com/
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: [5]MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: [6]http://lists.midrange.com/mailman/listinfo/midrange-l
or email: [7]MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at [8]http://archive.midrange.com/midrange-l.

References

Visible links
1. http://www.kisco.com/
2. mailto:rich@xxxxxxxxx
3. http://www.kisco.com/
4. http://www.kisco.com/
5. mailto:MIDRANGE-L@xxxxxxxxxxxx
6. http://lists.midrange.com/mailman/listinfo/midrange-l
7. mailto:MIDRANGE-L-request@xxxxxxxxxxxx
8. http://archive.midrange.com/midrange-l
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing

list

To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.