RE: Print file prints too low

["William Luke" <william.luke@xxxxxxxxxxxxxx>]

What model printer are you printing to. How is it connected, Twin Ax,
Ethernet, or off of a PC?


William Luke

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Dennis Lovelady
Sent: Monday, August 16, 2010 3:17 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Print file prints too low

If this is a continuous forms printer, one would expect that the operator
could load the forms differently.  (?)  If not, then you are probably bound
by the limitations of the hardware.

More details are needed about the hardware.

Dennis Lovelady
http://www.linkedin.com/in/dennislovelady
--
"A billion here, a billion there -- pretty soon it adds up to real money."
        -- Everett Dirksen (in U.S. Senate) 


> I'm trying to print cards on an odd sized paper.  The paper is 6 inches
> wide by 12 inches tall.  The print keeps missing the paper, both too
> far
> left and too far down.  I've been able to fix the horizontal alignment
> by
> adjusting the margin setting in CRTPRTF.  But the vertical alignment is
> too low and there doesn't appear to be a way to raise the print above
> row
> 1.  the top margin can only be increase (moving the print even lower),
> not
> decreased less than zero (which would raise it up like we need).  Any
> experience or ideas that would help?