×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
I have moved 0595 racks from machine to machine before, and all you need to
do is make sure the new machine sees all the hardware in the rack, setup the
partition and profile, allocate the hardware desired/required that you need,
and then set the tagged I/O to point to correct adapters, and IPL.
I moved a partition from one machine to another (by moving the 0595 rack and
cables) a few months back in less than an hour.
Pete
Pete Massiello
iTech Solutions
http://www.itechsol.com
Add iTech Solutions on Facebook:
http://www.facebook.com/group.php?gid=126431824120
Add iTech Solutions on LinkedIn:
http://www.linkedin.com/groups?gid=2206093
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Wintermute, Sharon
Sent: Thursday, August 12, 2010 12:53 PM
To: Midrange Systems Technical Discussion
Subject: Partitioning a 525
We have a 525 that is not partioned using Ops Console.
We are going to add an HMC since we need to "move" several lpars from
another box to this one.
We keep our lpars separated by 595 racks. Is it feasible to simply
"unplug" the 595 from a 550 and move it to the 525, do the lpar stuff on
the HMC and expect it to come up? (someone is saying it is that simple,
and I don't quite buy it.)
TIA,
Sharon Wintermute
midrange.com
