Re: LPAR for testing on a relatively small machine?

[Neeraj J <neerajj001@xxxxxxxxx>]

Are those 12 disk on same controller or different ?

On Thu, Jun 17, 2010 at 10:25 PM, Lennon_s_j@xxxxxxxxxxx <
lennon_s_j@xxxxxxxxxxx> wrote:

> Can we create an LPAR for testing on a relatively small machine?  Any
> thoughts from hardware experts would be appreciated, before we starting
> digging into the manuals...
>
> Here’s the picture:
>
> We have a 520 M25 running V6R1, 1 processor, 16GB memory with plenty of
> spare CPU time.
>
> We have 12 4328 disk units at Raid 5.  8 are 120mb, 4 are 100mb, for
> over 1 TB of space.  We could devote 25% of this to a test LPAR.
>
> I believe we could share the CPU so that the existing production
> partition would rarely be impacted (it would always get priority for
> cycles).
>
> But can we realistically split up 12 drives so that 25% goes to a new
> LPAR?  For continued production performance I think we’d want production
> data spread across all 12 units.
>
> Back in a former life on an earlier OS with much bigger machines, IIRC
> we needed a separate disk controller for each LPAR, but I was much
> further removed from hardware nuances then.  (I'm still not all that
> close...)
>
> Thanks,  Sam
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.