Have you checked with 3rd party dealers like Diamond Data, etc?? You may
get a decent deal there and their stuff qualifies for service.
DR2
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Fred Mitchell
Sent: Saturday, April 03, 2010 6:15 PM
To: Midrange Systems Technical Discussion
Subject: Disk problem - need advice
Hi,
I have an 9406-520 at V5R3 which I use for development and is not under
maintenance. Disk unit 1 has failed but the system is still running as I
have RAID5 setup. I have looked at eBay for a replacement disk but the only
ones I can find are in the US and cost more in shipping than they do to buy
and I would then have to add import duties and VAT.
The option I am looking at is backing up the system with GO SAVE option 21 ,
removing the failed disk and then restoring the system. I think I would
also have to move one of the other disks to position 1 to replace the failed
unit. Disk usage would still be at about 40% so I am not in desperate need
to replace the failed disk. I would just like to get RAID5 active again on
the remaining disks.
Does this sound reasonable? Is there anything else I should be doing apart
from taking as many backups as I can?
Display Disk Configuration Status
Serial Resource
ASP Unit Number Type Model Name Status
1 Unprotected
1 21-440D0 4326 070 DD006 DPY/Failed
2 21-448A9 4326 074 DD003 DPY/Unprotected
3 21-44A87 4326 074 DD004 DPY/Unprotected
4 21-44B35 4326 070 DD007 DPY/Unprotected
5 21-44643 4326 074 DD005 DPY/Unprotected
6 21-3327B 4326 074 DD002 DPY/Unprotected
7 21-44E3A 4326 070 DD001 DPY/Unprotected
Regards,
Fred Mitchell
--
e: fred@xxxxxxxxxxxxxxxxxx
w: www.conciseconsult.com
w: www.fredmitchell.com
m: +44 (0) 7711 168395
t: +44 (0) 191 432 7875
f: +44 (0) 870 051 7273
Skype: Fred_Mitchell
MSN: fred@xxxxxxxxxxxxxxxxxx
Concise Consulting Ltd.
36 Williams Park
Benton
Newcastle upon Tyne
NE12 8BL
Registered in England, number 3473386
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Vern Hamberg
Sent: 02 April 2010 23:11
To: Midrange Systems Technical Discussion
Subject: Re: sql scan for special characters
To use the LIKE predicate and be able to find strings with the wildcard
characters, you have to escape them. You do this using an ESCAPE expression.
You want to use a character that won't otherwise be in any of the values
tested.
LIKE 'AAAA+%BBB%' ESCAPE '+'
means that it will match values that start with AAAA%BBB - the final % sign
is a wildcard, the first one is a true % sign.
Found this in the reference manual under predicates in the language elements
chapter (2, that is).
HTH
Vern
Musselman, Paul wrote:
The scan for PercentSign isn't '%%%%' is it?
Paul E Musselman
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at
http://archive.midrange.com/midrange-l.
midrange.com
