× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Jacob,

I highly recommend attending some education sessions at the upcoming
COMMON Conference. See www.common.org for a list of sessions, many of the
people on this list are speakers at the conference. From your list of
questions, I can see you are very smart but your iSeries knowledge is enough
to be dangerous :)

The User profile password and the SST/DST password are entirely
different. Now, what might have happened is you were on a signon screen and
your console was varied off due to hitting the max number of invalid signon
attempts. Do a WRKSYSVAL QCONSOLE to see what the device for the console
is, and then vary on that device.

Remember your DST/SST password is case sensitive, and your user
profile password is by default not case sensitive (unless you changed to 128
character passwords). You can always reset your DST QSECOFR password to the
default if you are on QSECOFR and issue the command CHGDSTPWD *DEFAULT.

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com

Add iTech Solutions on Facebook:
http://www.facebook.com/group.php?gid=126431824120
Add iTech Solutionw on LinkedIn: http://www.linkedin.com/groups?gid=2206093





-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jacob Anderson
Sent: Wednesday, February 10, 2010 1:45 PM
To: 'Midrange Systems Technical Discussion'
Subject: Locked Out?

Hello,

So I opened my op console today and tried to login, had to change the DST
password, but that apparently is different than the profile password.

Logged into op console, got the profile login screen.

Entered my QSECOFR profile name and password from the change step earlier.
No good. Got a message about some varies of something.

Okay, so I tried another password that I thought that I had changed the
QSECOFR password to yesterday, but that was not correct.

Another attempt didn't work and a persistent varies message on the screen.
Grrr.

Disconnect from opcon and re-connect. Now where there was a profile login
screen, there is just a blank screen. The DST login password works fine, but
I am not prompted for a profile login.

Is there some timeout that I have to wait for the system to be able to login
again, or am I totally locked out of QSECOFR?

Thanks

-- jake





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.