Re: Where are my FixCentral downloads

If management central did not start, then you might check (in Navigator)

My Connections ->(Your computer)->Network -> Servers -> TCP/IP ->
Management Central and see if that server is started.

That's actually where I went to try and start it to begin with. I right
click and select Start, then it hangs for about 1 minute (assuming it is
trying to start) and then it returns control to me and the status is still
set to stopped.

I am doing my best to bite my tongue, but I shouldn't need to apply fixes to
my fix process so I can apply other fixes. IBM, your approach to applying
updates to an IBM i is to complicated!!!!!!!! Doing my best not to compare
it to the simplicity of applying updates to my Linux machines.

Aaron Bartell
http://mowyourlawn.com
http://mowyourlawn.com/blog/


On Thu, Nov 19, 2009 at 8:48 AM, Jim Essinger <dilbernator@xxxxxxxxx> wrote:

For V5R4 and before you don't have to be in restricted, but if you have
multiple users, it is a good idea if you are going to restart immediately.
If I am going to do a automatic IPL I do it off hours and with the system
in
restricted state.

If management central did not start, then you might check (in Navigator)
My
Connections ->(Your computer)->Network -> Servers -> TCP/IP -> Management
Central and see if that server is started.

Jim