×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
Steve,
Look here:
http://publib.boulder.ibm.com/infocenter/systems/scope/hw/index.jsp?topi
c=/iphau/opcip03.htm
<quote>
"Use this procedure to isolate an Operations Console bringup failure
when the SRC on the panel is A6xx5008 or B6xx5008. If you are not using
the Operations Console, see A6005004. This procedure only works with
cable-connected and LAN configurations. It is not valid for dial
connected configurations. Read the danger notices in Operations Console
isolation procedures before proceeding."
</quote>
Terry Anderson
Programming Manager
Citation Corporation
Switchboard 1.251.867.5481 ext 212
Direct Line 1.251.809.2312
Fax 251.867.0525
Cell 1.251.363.4975
message: 6
date: Thu, 1 Oct 2009 09:07:12 -0400
from: Steve Richter <stephenrichter@xxxxxxxxx>
subject: what is OPCIP03?
on the BC-S I create an IBM i partition using a 100 GB virtual disk
allocated from an IVM storage pool. When I activate this partition, with
the
I_BASE CD in the media tray, I get a reference code A6005008 "DST
console
failed to respond. Perform OPCIP03."
I start the ops console before I activate the partition. The ops
console
status is "connecting console". What is OPCIP03?
thanks,
midrange.com
