Re: Problems in setup Infoprinter to transform spoolfiles to PDFs.

[Vern Hamberg <vhamberg@xxxxxxxxxxx>]

Marvin

Your issue is described in the second-level text - reason 2 - something 
is not registered. There is a recovery step - this usually means 
installing an option of a licensed program - try looking at previous 
messages in the job log, as it says to do.

HTH
Vern

Marvin Radding wrote:
> I am attempting for the first time to setup infoprinter to transform the
> spoolfiles to PDFs.  I am following the manual but there seems to be
> something missing.
>
> I have created and configured the PSFCFG and the PDFMAP and the virtual
> printer.  When I start the printer device I get this error:
>
> Message . . . :   IPDS to PDF transform job not run.
>
> Cause . . . . :   An error caused PSF to be unable to start the IPDS to
> PDF 
> transform on device SPOOLPDF.  The reason code for the error is 2.
> Reason 
> codes have the following meanings. 1 - No PDF exit program is registered
> for 
> exit point name QIBM_QPQ_TRANSFORM and exit point format name XPDF0100
> with 
> program data of "IPDS    PDF". 2 - None of the programs registered for
> exit 
> point name QIBM_QPQ_TRANSFORM and exit point format name XPDF0100 with 
> program data of "IPDS    PDF" are available to PSF. Please see previous 
> messages in job logs for the programs that can not be found. 3 - The
> PDFDIR 
> value in the PSF configuration object associated with device SPOOLPDF 
> identifies a directory that does not exist. Processing of the printer
> writer 
> SPOOLPDF ended. Recovery  . . . :   If you do not want to generate PDF
> data 
> on this device, use the CHGPSFCFG command to change the PSF
> configuration 
> object associated with device SPOOLPDF to have a value of PDFGEN(*NONE).
> For 
> reason codes of 1 and 2, use the ADDEXITPGM to register a program that
> is 
> available for exit point name QIBM_QPQ_TRANSFORM and exit point format
> name 
> XPDF0100 with program data of "IPDS      PDF" and start the writer
> again. 
> For reason code 3, use the CHGPSFCFG command to change the PSF
> configuration 
> object associated with device SPOOLPDF to use a directory in PDFDIR that
>
> exists. Technical description . . . . . . . . :   The internal message 
> identifier (ID) is .
>
>
> Does anyone know what is missing or what I still need to setup?
>
> Marvin
>
>
>