Pete,
I'll do that as soon as I can. Right now I'm doing a Save *All (21) on the test box.
I did get the DNS Server addresses with the IPCONFIG (10.0.0.16 and .14) which point to two Windows servers. I'm guessing that the second address is a backup, huh?
Jerry C. Adams
IBM System i Programmer/Analyst
--
B&W Wholesale
office: 615-995-7024
email: jerry@xxxxxxxxxxxxxxx
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Massiello
Sent: Tuesday, August 25, 2009 9:39 AM
To: 'Midrange Systems Technical Discussion'
Subject: RE: PTF FTP Download Problem
Jerry,
Just cutting part of your reply " Domain name server:
INTNETADR
Internet address . . . . . . . *NONE "
Tells me that you don't have a Domain Name Server defined. Find out
what you are using on your PC for DNS using IPCONFIG /ALL from a dos prompt,
and then put those DNS IP Addresses into the DNS on option 12 of CFTCP.
Pete
Pete Massiello
iTech Solutions
http://www.itechsol.com
Add iTech Solutions on Facebook:
http://www.facebook.com/group.php?gid=126431824120
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jerry Adams
Sent: Tuesday, August 25, 2009 10:09 AM
To: Midrange Systems Technical Discussion
Subject: RE: PTF FTP Download Problem
Rob,
First, I did not use a script or a program to try the interactive response.
Rather, I did as you illustrate below. It starts off with:
Previous FTP subcommands and messages:
Connecting to host PTF.BOULDER.IBM.COM at address 207.25.253.62 using port
21.
Sits there for ages (okay, 3-5 minutes) and returns with:
Cannot connect to host PTF.BOULDER.IBM.COM at address 207.25.253.62. Try
again later.
Never prompts me for user id and password.
Second, when I run option 12 of CFGTCP, the following panel(s) are
displayed:
Change TCP/IP Domain (CHGTCPDMN)
Type choices, press Enter.
Host name . . . . . . . . . . . HOSTNAME 'bnwbackup'
Domain name . . . . . . . . . . DMNNAME 'bnw.com'
Domain search list . . . . . . . DMNSCHLIST *DFT
Host name search priority . . . HOSTSCHPTY *REMOTE
Domain name server: INTNETADR
Internet address . . . . . . . *NONE
More...
Additional Parameters
Port . . . . . . . . . . . . . . PORT 53
Protocol . . . . . . . . . . . . PROTOCOL *UDP
Initial domain name server . . . INLDMNSVR *FIRST
Domain name server retry: DMNSVRRTY
Number of retries . . . . . . 2
Time interval . . . . . . . . 2
This is our backup system. The production system shows the same thing,
except that HOSTNAME = BNW400. When I run FTP PTF.BOULDER.IBM.COM from it,
I get the message in the FTP feedback panel of: Cannot find host
PTF.BOULDER.IBM.COM. Until today I had never tried to connect to an outside
site from production. I do, however, FTP save files of our production
libraries to the test system every morning at about 0130 using an explicit
IP address (10.0.0.4). It worked fine last night.
Ping to PTF.BOULDER.IBM.COM from test times out after five [5] tries;
production says "Unknown host...". Just to test our overall connection to
the outside world, I ran the ping from a command prompt in windows. Worked
fine, except that oddly (to me) it showed an address of 170.225.15.26, not
207.25.253.62 which the System i FTP showed it was trying to connect to.
Maybe that's normal; I don't know. I, also, pinged google and ask from
Windows; got replies. When I pinged from the test System i, I got the
"Unknown host..." message.
I used the FTP from the test System i to download the latest cume (V5R4)
when it first came out. Don't recall using it again until yesterday. I
fat-fingered my keyboard yesterday so that Copy/Paste didn't work (got it
working eventually); it is imminently within the realm of possibility that I
did something similar to the System i without realizing it.
Jerry C. Adams
IBM System i Programmer/Analyst
--
B&W Wholesale
office: 615-995-7024
email: jerry@xxxxxxxxxxxxxxx
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, August 25, 2009 7:54 AM
To: Midrange Systems Technical Discussion
Subject: Re: PTF FTP Download Problem
I thought it was his DNS configuration at first too. However did you
notice the address 207.25.253.62 in the "connecting to" message? Doubt
that DNS is the issue. CFGTCP, option 12 and a page down is where you
check your list of DNS's.
Jerry, when they said to try it interactive they meant without the script.
Simply type in
FTP PTF.BOULDER.IBM.COM
and then when prompted, enter in the anonymous and the password.
If that connects then I really think something is wrong with your script.
My script is this
0001.00
0002.00 open ptf.boulder.ibm.com
0003.00 user "anonymous" ROB@xxxxxxxxxxxxxxxxxxxxxxxx
0004.00 locsite namefmt 1
0005.00 lcd /fixes/cume
0006.00 ascii
0007.00 cd /ccss/lv1/us38775/b8538775/cume/c
0008.00 get ftpCUME.txt
0009.00 get ilstCUME.txt
0010.00 binary
0011.00 mget CUME_*.bin
0012.00 quit
Notice the blank line at the beginning?
Rob Berendt
midrange.com
