Using Putty

On Wed, Aug 19, 2009 at 2:24 PM, Laine, Rogers <rlaine@xxxxxxxxxxxxxxx>wrote:

In reading these instructions I need to ask how one is able to enter
line commands on a HMC v7r4.0?

Thanks,
Rogers

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Wednesday, August 19, 2009 12:54 PM
To: MIDRANGE-L@xxxxxxxxxxxx
Subject: HMC updates (doing it remotely) via putty.

I have a remote HMC at another location. Has anyone ever attempted
upgrading from V6.1.3 to V7.3.4 via putty and using these instructions??
I can ping ftp.software.ibm.com with no problems from the remote HMC.

*Updating with additional V6R1.3 Corrective Service Patches

*The patch updates will be much quicker than the update to V6R1.3, some
30 seconds or less, if you look away, the reboot might have already
started.

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/fixes/MH01082.zip -r

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/fixes/MH01110.zip -r

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/fixes/MH01128.zip -r

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/fixes/MH01127.zip -r

Once your last reboot is complete, verify the installation by running
following command.

lshmc -V

You should see following output

"version= Version: 6
Release: 1.3
HMC Build level 20080112.1
MH01082: New DST updates and Code Update fix for E302F842, B1818A0D,
B1818A0E failures (01-12-2008)
MH01110: Security fixes for HMC V6R1.3 (05-22-2008)
MH01128: Disable HTTP trace
MH01127: Enable Upgrading to V7R3.4.0 (08-18-2008)
","base_version=VV6R1.2
"

If there is any firmware maintenance you need to perform on your Power 5
servers prior to upgrading to V7 then you need to accomplish that first
before doing any further HMC upgrades. If you want to backup your HMC
while it is at V6R1.3 then now would also be a good time to perform such
a task.
*Upgrading to V7R3.4 from V6R1.3 Remotely

*With patch MH01127 applied to HMC V6R1.3 you are ready to upgrade to
V7R3.4. Before this patch, getting to later V7 levels was a two step
process which involved upgrading to V7R3.2 then upgrading to V7R3.4.
Following are the commands required to download then configure the HMC
to perform a remote upgrade using the network images. The instructions
for remote upgrade using network images can be found from the link
listed in related URLs section and there is additional information and
options you might wish to review prior to continuing. Following are the
command you could use to perform the upgrade to V7R3.4 remotely.

saveupgdata -r disk

getupgfiles -h ftp.software.ibm.com -u anonymous --passwd ftp / -d
/software/server/hmc/network/v7340

chhmc -c altdiskboot -s enable --mode upgrade

hmcshutdown -r -t now

Once the HMC reboots the installation should start and typically takes
about an hour. After the installation of V7R3.4 is completed you should
be able to remotely access the HMC again. You then will need to install
the latest required fixes, which as of June 2009 is Service Pack 2 and
MH01181. The following commands will download the packages from the IBM
website, install them, and reboot.

Installing 734 SP2 (three fixes then reboot)

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/updates/HMC_Update_V7R340_SP2_1.zip

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/updates/HMC_Update_V7R340_SP2_2.zip

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/updates/HMC_Update_V7R340_SP2_3.zip -r

Installing MH01181 (one fix file then reboot)

updhmc -t s -h ftp.software.ibm.com -u anonymous -p ftp / -f
/software/server/hmc/fixes/MH01181.zip -r

After the HMC is rebooted with the final required maintenance PTF then
you can verify that the install is complete by using the lshmc -V
command. The output should appear similar to the following.

"version= Version: 7
Release: 3.4.0
Service Pack: 2
HMC Build level 20090514.1
MH01181: Fix for HMC V7R3.4.0 Service Pack 2 (05-21-2009)
","base_version=V7R3.4.0 "

Congratulations! Now you are ready to manage your servers with the new
HMC
V7 console.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.

************************************************
This E-Mail transmission (and/or the documents accompanying it)
may contain information belonging to the sender which is confidential,
privileged and/or exempt from disclosure under applicable law. The
information is intended only for the use of the individual(s) or entity
named above. If you are not the intended recipient, you are hereby
notified that any disclosure, copying, distribution or the taking of any
action in reliance on the contents of this information is strictly
prohibited. If you have received this E-Mail transmission in error,
please immediately notify us by return E-Mail or telephone to arrange
for return of its contents including any documents.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].