Rob,

Tried the ping and it did not work. So I guess I need to setup a route
on the HMC for the dalarray.zzzzz.com, right?

Rogers

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, August 12, 2009 3:47 PM
To: Midrange Systems Technical Discussion
Subject: Re: Power6 Service Alert Setup on HMC

Did you try
HMC Management
Test Network Connectivity
to first ping dalarray.zzzzz.com

Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From:
"Laine, Rogers" <rlaine@xxxxxxxxxxxxxxx>
To:
<midrange-l@xxxxxxxxxxxx>
Date:
08/12/2009 04:34 PM
Subject:
Power6 Service Alert Setup on HMC
Sent by:
midrange-l-bounces@xxxxxxxxxxxx



I'm setting up the Service Alert on the HMC and running the TEST
function.
Below are the steps to verify the connection.

Where can I find information on the FAILED TO VERIFY LINK CONNECTION
message.
I'm thinking it is related to IP address not being defined to our
firewall that's causing the problem. Can you confirm this?

If a firewall is in place between the HMC and the Internet, it must
allow outgoing TCP/IP connections on port 443 from the Hardware
Management Console to your service provider. The IP addresses you must
allow depends on the protocol you chose on the Protocol to Internet tab.

If IPv4 (or IPv6 and IPv4) is selected, you must allow access to:
129.42.160.48 and 207.25.252.200 (allow Hardware Management Console
access to System Authentication Server (SAS))
129.42.160.49 and 207.25.252.204 (allow Hardware Management Console
access to IBM Service for North or South America)
129.42.160.50 and 207.25.252.205 (allow Hardware Management Console
access to IBM Service for all other regions) Note: You only need to
specify the IP addresses necessary to setup access to SAS and those
appropriate for your region.


Test beginning
Attempting to use a IPv4 connection
Waiting for connection availability
Request has been added to the queue.
Opening connection
HMC is attempting to activate a connection.
Utilizing the following resource: Internet
Attempting to connect through a configured proxy:
dalarray.zzzzz.com:8080
Attempting to connect through a configured proxy:
dalarray.zzzzz.com:8080
Failed to verify link connection.
Request has been cancelled.
Request has been removed from the queue.
Connection failed
Test completed unsuccessfully
************************************************
This E-Mail transmission (and/or the documents accompanying it)
may contain information belonging to the sender which is confidential,
privileged and/or exempt from disclosure under applicable law. The
information is intended only for the use of the individual(s) or entity
named above. If you are not the intended recipient, you are hereby
notified that any disclosure, copying, distribution or the taking of any

action in reliance on the contents of this information is strictly
prohibited. If you have received this E-Mail transmission in error,
please immediately notify us by return E-Mail or telephone to arrange
for return of its contents including any documents.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].