× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Pete,

Isn't that (delay) what the QUPSDLYTIM system value is for? Or have I misunderstood all of this time?

I don't have a monitor program. We get blips frequently. They oftentimes take down our "new and improved" Windows 2003 servers (especially the one running MS-Exchange), but our i5's never hiccup. We did have power down long enough a few weekends ago (we're basically a 10 x 5 business) to drain the UPS, and that shut 'em down flat. But blips don't.

Jerry C. Adams
IBM System i Programmer/Analyst
B&W Wholesale
office: 615-995-7024
email: jerry@xxxxxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pete Helgren
Sent: Friday, February 06, 2009 10:28 AM
To: Midrange Systems Technical Discussion
Subject: Re: UPS signal status

I have a similar problem as Armand and I should probably submit a DCR to
IBM because I really don't think it works in a way that is helpful. I
think that if a "weak battery" condition is detected during a "power
failure" there should be a delay, set by a system value, that allows the
i to wait a user defined # of seconds before beginning the power down
sequence. An immediate shutdown when a millisecond drop in power is
detected just seems silly. Sure, a "weak battery" is unpredictable as a
backup power source but when a transient power blip can bring down your
system, *that* seems a little anal retentive to me. Give me the option
of determining how many seconds the power has to be off when there is a
"weak battery" before shutting down.

Pete

James F Hawkins wrote:
I know on that we get one message from our UPS to our "IBM i" 520 when
there is any kind of a power issue. It could be a total or partial loss of
power or any other function that forces the batteries to provide or
supplement the power coming in from the power company. A second type of
message is received when power resumes to normal.

I am curious why your system powered down instantly. I wrote our procedure
(largely because we get a few blips) to notify me of a power issue,
recheck in 30 seconds, then again in 5 minutes to determine if power has
been restored. At the end of the 5 minutes with no power to the UPS is
when we begin to the process to power down the system.

Armand Borick wrote:

We have a 515 with the ususal UPS conneced, but when a power hit

happens,

the CPF1816 message is logged to QHIST, and the system powers down
instantly!



As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.