RE: Where is the Operations Console Port.

Mark,

First, you need to find out from the business partner what was
ordered? Direct (using a cable to connect to the Modem WAN IOA) or Lan
Attached using an Ethernet Cable. You can also do a 21+65 sequence (check
the archives) to find out which connection option the machine will have.

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark Walter
Sent: Tuesday, December 30, 2008 3:25 PM
To: 'MIDRANGE-L@xxxxxxxxxxxx'
Subject: Where is the Operations COnsole Port.

Just received a new Power6 520 Express. (8203-E4A). This is the first
iSeries that I've set up without either an HMC or Twinax console. I have two
sets of ports on the back. SPCN1 and 2 and S1, S2. Which is to be used with
the Operations Console. And which is to be used with the UPS Sensor?

Thanks,

Mark

Mark Walter
IBM Certified System i Specialist
Paragon Consulting Services, Inc
mwalter@xxxxxxxxxxxxxxx<mailto:mwalter@xxxxxxxxxxxxxxx>
www.paragon-csi.com<http://www.paragon-csi.com/>
717.764.7909 Ext. 26