1. Ensure that LDR REAdY or SEQ REAdY appears on the message display.
2. Press and hold the NEXT button and then the MODE button until dIAG
MENU appears on the message display (approximately 5 seconds)
3. Press the MODE until CHG MOdE appears on the message display
4. Press SELECT to display the current mode of operation.
5. Press NEXT or PREVIOUS to toggle other mode between SEQUENTIAL and
RANdOM
6. Choose the mode that you want and press SELECT. CYCLE PWR blinks on
the message display. If you changed to random mode, LdR REAdY then
displays; if you changed to sequential mode, SEQ REAdY then displays.
7 To activate the new mode of operation, cycle power.
You want Sequential mode. They ship in Randon mode.
Chris Bipes
Director of Information Services
CrossCheck, Inc.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bill
Sent: Friday, December 26, 2008 10:37 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re: 3581-H23 Programming
rob@xxxxxxxxx wrote:
Do you have it configured in "Sequential" or "Random" mode?
That's the thing, I don't know how to configure the unit. It was
purchased used, so I don't have a manual, and I haven't found anything
on the 'net to help either.
midrange.com
