I got that far but how do you input the numbers being that there's no numpad on the printer? That's my problem. I tried all combinations of scroll and arrow keys and can't figure it out.

Bryan Burns
iSeries Specialist
ECHO, Incorporated
Lake Zurich, Illinois

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Willie J. Moore
Sent: Monday, September 29, 2008 11:46 AM
To: midrange-l@xxxxxxxxxxxx
Subject: RE: How to enter number using IBM 6400 printer control panel

Press STOP
SCROLL to 'Ethernet Parameters' (only appears of ethernet feature is installed)
Press ENTER
SCROLL till you see option to set IP ADDRESS, etc.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Burns, Bryan
Sent: Monday, September 29, 2008 9:24 AM
To: 'MIDRANGE-L@xxxxxxxxxxxx'
Subject: How to enter number using IBM 6400 printer control panel


How can I enter numbers with the control panel on an IBM 6400 printer so I can set an IP address and subnet? I need to override the 000.000.000 addresses. This printer has always had a twinax interface but I installed an axis card and I need to set the address. This is my first IBM 6400 twinax to Ethernet experience.
Thanks,
Bryan Burns


This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].