That would be a Migration (if it's the old 720 CEC as you say) Tower, which
isn't supported in V5R4, so if you plan to go to V5R4, you will need to
remove the tower first. You can move both cards over, and since we don't
know what slots are open its hard to say where they should go. While both
these cards are old, the 2838 will work fine, but the 2729 is a very slow
card. You didn't say what tape drive you have off the 2729 card, but you
might look at a 2749 card to drive the tape (again, not knowing the tape
device, I can't say).


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Carl Galgano
Sent: Monday, March 10, 2008 6:05 PM
To: 'Midrange Systems Technical Discussion'
Subject: Move some older cards to a model 820

I have a client with an 820, that has an expansion cabinet (looks like a
720). The ONLY thing the expansion cabinet is being used for is to house a
2729 SCSI card for a tape drive an a 2838 Ethernet card. Can I move these
to the base 820 cabinet?? If so, what are the preferred slots, if not, what
are the replacement cards?

Thanks in advance to your hardware gurus.

Carl J. Galgano
EDI Consulting Services, Inc.
F: 678-881-9224

530 Roselane Street
Marietta, GA 30060

No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.518 / Virus Database: 269.21.7/1323 - Release Date: 3/10/2008
11:07 AM

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].