RE: Tape Drive Questions

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Jim Franz
Sent: Friday, December 28, 2007 6:25 PM
To: Midrange Systems Technical Discussion
Subject: Re: Tape Drive Questions


btw - absolutely new drives need to be cleaned.
Also, new tapes (1st use) can leave more residue than a used
tapes (which is
not a reson to buy used tapes...).
jim

----- Original Message -----
From: "Bradley V. Stone" <bvstone@xxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Friday, December 28, 2007 6:19 PM
Subject: RE: Tape Drive Questions

Sounds good. I'm guessing the tapes simple aren't compatible then. Oh
well, it was worth a shot.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Paul Nelson
Sent: Friday, December 28, 2007 3:47 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Tape Drive Questions


The cleaning cartridge will pop back out when the drive decides
it is clean.

Now, do WRKCFGSTS *DEV TAP* and press enter. You may have caused it to
fail. Vary it off and back on. You may also want to cycle the power on
the
tape drive first. Did you buy the compatible cartridges? If what
you got is
not a compatible cartridge, they won't work no how, no way.

Paul Nelson
Cell 708-670-6978
Office 512-392-2577
nelsonp@xxxxxxxxxxxxx


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bradley V. Stone
Sent: Friday, December 28, 2007 3:42 PM
To: MIDRANGE-L@xxxxxxxxxxxx
Subject: Tape Drive Questions

On my new 515 I have a 4mm 36G drive model 9258.

I got some 4GB tapes from someone on the list, but they won't take.

I insert the tape, it goes in, and spits it back out and the

middle light

blinks. I think it's the cleaning light. Brand new machine, needs a
cleaning?

So, I did get a cleaning cartrige. Do you just stick it in and let it
clean? IBM's infocenter hasn't been much help with this. Not even a
mention of a 4mm drive, just 1/4" and 8mm. I did try that but

it spit it

back out after about 15 seconds and got a message in QSYSOPR:

*Attention* Tape device or tape library *N failed

Not sure it that was from the cleaning tape.

Thanks for any and all information.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.