RE: HELP - Problems Retrieving LPAR Number 10 and Above

MMA would be a Power 6 Model 570

Pete

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bradley V. Stone
Sent: Tuesday, December 18, 2007 10:43 AM
To: Midrange Systems Technical Discussion
Subject: RE: HELP - Problems Retreiving LPAR Number 10 and Above

I'm using the logical serial number value for everything now.

I am assuming since serial number is 8, and logical serial number is 10,
that gives you a few possibilities for a number of partitions.

What I am finding odd now is a model number MMA or something like that,
instead of a number. :)

Bradley V. Stone
BVSTools - www.bvstools.com
eRPG SDK - www.erpgsdk.com

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Gary Monnier
Sent: Tuesday, December 18, 2007 9:38 AM
To: Midrange Systems Technical Discussion
Subject: RE: HELP - Problems Retreiving LPAR Number 10 and Above


There are a number of APARs for MATMATR at V5R3. Your issue may be
buried in one of them.

MA28177 CLOSED PER LIC - REMOVE HMCSTAT DATA FROM HMC INFO RETURNED BY
MATMATR
MA29554 CLOSED PER LIC-INCORROUT ON/OFF COD INFORMATION MISSING ON
MATMATR
MA30278 CLOSED PER LIC - MATMATR 01E0 SHARED POOL INFORMATION IS
INCOMPLETE
MA31421 CLOSED PER LIC-INCORROUT CHANGE MATMATR OPTION 20C TO USE
CONSTANT VALU
MA28362 CLOSED PER LIC - CUSTOMER CONTACT INFORMATION MATMATR 205
MB01311 CLOSED UR1 LIC-INCORROUT MATMATR 01F4 RETURNING INCORRECT DATA

SE25405 CLOSED PER OSP-INCORROUT NUMBER OF ON DEMAND PROCESSORS IN
QAPMCONF
MA30538 CLOSED PER LIC-INCORROUT NO CAPACITY ON DEMAND INFO IN
SECONDARY LPAR
MA30537 CLOSED PER LIC-INCORROUT NO CAPACITY ON DEMAND INFO IN
SECONDARY LPAR
MA34145 CLOSED PER LIC FUNCTION CHECK VL02001720 COLLECTING COD
INFORMATION

-----Original Message-----
From: midrange-l-bounces+gary.monnier=powertech.com@xxxxxxxxxxxx
[mailto:midrange-l-bounces+gary.monnier=powertech.com@xxxxxxxxxxxx] On
Behalf Of Richard Schoen
Sent: Monday, December 17, 2007 3:37 PM
To: midrange-l@xxxxxxxxxxxx
Subject: HELP - Problems Retreiving LPAR Number 10 and Above


Hello All,

We use the MatMatr function to get LPAR info for our software and
apparently we have a customer with an 840 and LPAR 10 with V5R3 where
the LPAR number isn't registering correctly.

Does anyone know what the LPAR numbering beyond 9 should be ?

123456789ABCD ?

Any feedback would be helpful.

This is the first time we've seen this problem and the CurPart is listed
as a 1byte value according to the IBM Info Center:
http://publib.boulder.ibm.com/infocenter/iseries/v5r3/index.jsp?topic=/r
zatk/MATMATR.htm

Should we be using the Logical Serial Number value which is 10
characters instead ?

If so, what would that look like for LPAR #10.

Thanks in advance.
Regards,
Richard Schoen
RJS Software Systems Inc.
"Get the information you need. Now!"
Email: richard@xxxxxxxxxxxxxxx
Web Site: http://www.rjssoftware.com <http://www.rjssoftware.com/>
Tel: (952) 898-3038
Fax: (952) 898-1781
Toll Free: (888) RJSSOFT


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L)
mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.