×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
You'll need to use Function 11 to see the current SRC - so after
pressing 65 / 21, press 11 to see the current SRC. It will not display
automatically.
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Joe Pluta
Sent: Friday, September 28, 2007 9:20 PM
To: 'Midrange Systems Technical Discussion'
Subject: RE: Best Manual for Scratch Install
Unfortunately, I can't get this to work. I enabled advanced functions
using
options 25 and 26, but I can't seem to get the system to recognize the
65/21
sequence. Usually, when I position to 65 using the up arrow and then
hit
the blue Enter button, it just responds with "65 00". I then push the
down
arrow to get to 21, press the blue button again (well within 45 seconds)
and
it responds with "21 00". Eventually it just redisplay the normal IPL
display, although sometimes I see A6C3 500D and sometime I see D600 8065
(this latter usually after I hit the 65 option).
It's very frustrating.
Joe
From: Lukas Beeler
You can change the console manually by using the function 21 / 65 way
using the control panel.
http://publib.boulder.ibm.com/infocenter/iseries/v5r3/index.jsp?topic=/r
zajr/rzajrfunctions6521.htm
midrange.com
